General Discussion
  >> Fibre Broadband


Register (or login) on our website and you will not see this ad.


Pages in this thread: 1 | [2] | (show all)   Print Thread
Standard User Rytenuff
(experienced) Fri 13-Dec-13 04:54:05
Print Post

Re: Which lead please.


[re: jchamier] [link to this post]
 
Thank you to everyone who replied. I have ordered a CAT6 COUPLER. Hopefully that will do the job.
Standard User trolleybus
(member) Fri 13-Dec-13 05:33:31
Print Post

Re: Which lead please.


[re: deleted] [link to this post]
 
Should you have a HH5 already and switch from ADSL to FTTC are you obliged to accept the new service directly into the HH5 or can you "demand" that an Openreach modem is supplied?
Standard User deleted
(deleted) Fri 13-Dec-13 07:55:51
Print Post

Re: Which lead please.


[re: trolleybus] [link to this post]
 
I think BT expect you to use the HH5, but a HG612 is only a few quid on eBay.


Register (or login) on our website and you will not see this ad.

Administrator MrSaffron
(staff) Fri 13-Dec-13 16:27:21
Print Post

Re: Which lead please.


[re: trolleybus] [link to this post]
 
Depends on what exactly was ordered, if you wan the full install with modem that will remain an option, but am expecting providers to reflect the cost of the full engineer visit in the pricing

Andrew Ferguson, [email protected]
www.thinkbroadband.com - formerly known as ADSLguide.org.uk
The author of the above post is a thinkbroadband staff member. It may not constitute an official statement on behalf of thinkbroadband.
Standard User omnius
(member) Fri 13-Dec-13 18:07:39
Print Post

Re: Which lead please.


[re: Rytenuff] [link to this post]
 
i to got a hub 5 and so got one of these....

http://www.ebay.co.uk/itm/350682964560

ive had no speed loss on a 10m cable (hub on top of wall unit at other end of room) i used the cat6 option, cable is less bendy then 5e (i found anyway) but does the job

Edited by omnius (Fri 13-Dec-13 18:08:38)

Pages in this thread: 1 | [2] | (show all)   Print Thread

Jump to