General Discussion
  >> Fibre Broadband


Register (or login) on our website and you will not see this ad.


Pages in this thread: 1 | 2 | 3 | 4 | [5] | 6 | 7 | 8 | 9 | 10 | 11 | 12 | (show all)   Print Thread
Standard User adslmax
(knowledge is power) Thu 13-Feb-14 16:42:04
Print Post

Re: My Fibre now activated


[re: wolvesmad] [link to this post]
 
In reply to a post by wolvesmad:
How did you get those line stats adslmax?


VDSL Line stats from Hub 5 - Helpdesk section

plusnetFTTC72 Meg
Standard User adslmax
(knowledge is power) Thu 13-Feb-14 17:00:59
Print Post

Re: My Fibre now activated


[re: adslmax] [link to this post]
 
The line stats are the same on unlocked BTO modem. So, I am please to hear that noise margin had plenty of room for crosstalk, I stick with BTO modem and Netgear router for now. And leave it alone. Happy with 72/17 overall.

plusnetFTTC72 Meg
Administrator MrSaffron
(staff) Thu 13-Feb-14 17:09:28
Print Post

Re: My Fibre now activated


[re: adslmax] [link to this post]
 
Or some congestion/management was kicking in slowing down the single thread.

Not that any other speed test would have shown that.

Andrew Ferguson, [email protected]
www.thinkbroadband.com - formerly known as ADSLguide.org.uk
The author of the above post is a thinkbroadband staff member. It may not constitute an official statement on behalf of thinkbroadband.


Register (or login) on our website and you will not see this ad.

Standard User RobertoS
(sensei) Thu 13-Feb-14 17:12:56
Print Post

Re: My Fibre now activated


[re: adslmax] [link to this post]
 
In reply to a post by adslmax:
I have now set up TBB BQM: http://www.thinkbroadband.com/ping/share/921644d571c...
That link is dead. Did you set up an static IP address with Plusnet for your new connection? (That's assuming you had one before and it isn't being used for the FTTC).

My broadband basic info/help site - www.robertos.me.uk | Domains,site and mail hosting - Tsohost.
Connection - Plusnet UnLim Fibre (FTTC). Sync ~ 59.4/14.4Mbps @ 600m. - BQM

"Where talent is a dwarf, self-esteem is a giant." - Jean-Antoine Petit-Senn.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Allergy information: This post was manufactured in an environment where nuts are present. It may include traces of understatement, litotes and humour.
Standard User adslmax
(knowledge is power) Thu 13-Feb-14 17:19:23
Print Post

Re: My Fibre now activated


[re: RobertoS] [link to this post]
 
I got static ip as I deleted it and create a new one. Because I had a play with BT HH5, BTO unlocked modem and now went back to as it was BTO / Netgear router. Going to leave it alone now. Because I already know the line stats that why.

The new link here: http://www.thinkbroadband.com/ping/share/d69f7c149f8...

plusnetFTTC72 Meg

Edited by adslmax (Thu 13-Feb-14 20:19:21)

Standard User deleted
(deleted) Thu 13-Feb-14 17:53:25
Print Post

Re: My Fibre now activated


[re: deleted] [link to this post]
 
In reply to a post by BatBoy:
Looks a bit slow http://www.thinkbroadband.com/speedtest/results.html...


Mine is awful on the TBB tester for some reason. 6 threaded test only would be handy mind.
Standard User wolvesmad
(fountain of knowledge) Thu 13-Feb-14 20:13:43
Print Post

Re: My Fibre now activated


[re: adslmax] [link to this post]
 
Off the HH5 itself? I can't find them

-

BT Broadband21CN
Standard User deleted
(deleted) Thu 13-Feb-14 20:13:53
Print Post

Re: My Fibre now activated


[re: R0NSKI] [link to this post]
 
In reply to a post by R0NSKI:
Nice attainable figures there, should give some room for crosstalk before it affects your sync.


Took ~120 connections to take me from 99.8Mb to 75Mb attainable. Still on full speeds though as modem hasn't resynched smile
Standard User deleted
(deleted) Thu 13-Feb-14 20:15:10
Print Post

Re: My Fibre now activated


[re: wolvesmad] [link to this post]
 
You have to be using the HH5 as a modem then look in Troubleshooting/Helpdesk
Standard User adslmax
(knowledge is power) Thu 13-Feb-14 20:16:05
Print Post

Re: My Fibre now activated


[re: deleted] [link to this post]
 
Was Maximum data rate 104409k any good with line attenuation 10.6dB and noise margain 12.8dB for future crosstalk or vectoring VDSL?

plusnetFTTC72 Meg
Pages in this thread: 1 | 2 | 3 | 4 | [5] | 6 | 7 | 8 | 9 | 10 | 11 | 12 | (show all)   Print Thread

Jump to