In reply to a post by Iluv4G:

thanks for your intervention. Richard is looking into my case on Monday. If he can't help then I will move to get FTTC I have decided.

Brill news mate. He will sort it out for you.

Well i hope so, assuming my cab is viable. i suspect most people have phone with virgin so they might not think it worth while, having said that the other areas had the same too and they got it.

All I can do is hope and prey something can be done. Ill keep you posted

ive just been out and an engineer is working on a line, I walked past. (which took me a while being old) but there looks like a few hundred lines on it. so that's a good bit of hope

Edited by deleted (Sat 15-Feb-14 17:26:54)

First time I managed to get my full line stats off HG612 Modem (unlocked)

http://postimg.org/image/7px9hjx2b/full/

http://postimg.org/image/dpl0l7hur/full/

So, I haven't got a clue if this line stats any good or bad? What does interleaving Off (1) mean? - does it mean it on the FAST mode?

Edited by adslmax (Sun 16-Feb-14 14:30:18)

In reply to a post by adslmax:

So, I haven't got a clue if this line stats any good or bad?

Looks very good. Don't understand why you don't get an attenuation number, my hacked HG612 does. Maybe yours has the older firmware. (do you still have a web interface, and do you have the BTagent running to upgrade it?)

What does interleaving Off (1) mean? - does it mean it on the FAST mode?

I think off is the same as fast isn't it? I assume the (1) means a depth of one, because my line has an interleave of 1030.

In the first image, in the top middle section, there is a D: 1 and that is the interleave depth. 1 meaning no interleave. Mine is 1051 down, and 1 up.

(I use dslstats, the competing tool, but the information is the same).

My HG612 hacked firmware is A2pv6C035m.d22g is that the latest firmware?

It looks like he is still on the original unlocked firmware, unless BT agent is disabled sooner or later it will get updated - nothing to worry about. The webpage will be lost, but all the information you need is in the GUI program which will still work.

There is a later version of the firmware with the GUI enabled, look in the experimental folder that is linked to from this post.

jchamier is correct, interleaving depth of 1 is fast path.

I use this firmware: bcm96368MVWG_fs_kernel_HG612V100R001C01B028SP10_no-btagent - B028SP10 based firmware.

http://postimg.org/image/v5f6mwgtf/full/

Yes that is the newer firmware with BT Agent disabled, and no web page.

Depressingly good statistics.

Zero CRC errors downstream in 9.5 hours.

In reply to a post by WWWombat:

Depressingly good statistics.

Zero CRC errors downstream in 9.5 hours.

Funny one person say from ocuk forum that my line stats look awful and need to raise openreach / isp. He probably jealous?