Here is mine:

xdslcmd info --pbParams
xdslcmd: ADSL driver and PHY status
Status: Showtime
Retrain Reason: 0
Max: Upstream rate = 37662 Kbps, Downstream rate = 107864 Kbps
Path: 0, Upstream rate = 19999 Kbps, Downstream rate = 79987 Kbps

Discovery Phase (Initial) Band Plan
US: (0,95) (868,1207) (1972,2783)
DS: (32,859) (1216,1963) (2792,3971)
Medley Phase (Final) Band Plan
US: (0,95) (868,1207) (1972,2783)
DS: (32,859) (1216,1963) (2792,3971)
VDSL Port Details Upstream Downstream
Attainable Net Data Rate: 37662 kbps 107864 kbps
Actual Aggregate Tx Power: - 1.9 dBm 12.5 dBm
============================================================================
VDSL Band Status U0 U1 U2 U3 D1 D2 D3
Line Attenuation(dB): 2.4 12.4 18.5 N/A 6.4 14.8 23.0
Signal Attenuation(dB): 2.4 11.4 17.7 N/A 6.4 14.8 23.0
SNR Margin(dB): 22.2 22.7 22.5 N/A 13.8 13.6 13.6
TX Power(dBm): -16.1 -31.2 -2.0 N/A 8.1 8.0 7.0

In reply to a post by adslmax:

Here is mine:

and here is Max's with the PRE tags:

xdslcmd info --pbParams
xdslcmd: ADSL driver and PHY status
Status: Showtime
Retrain Reason:	0
Max:	Upstream rate = 37662 Kbps, Downstream rate = 107864 Kbps
Path:	0, Upstream rate = 19999 Kbps, Downstream rate = 79987 Kbps

Discovery Phase (Initial) Band Plan
US: (0,95) (868,1207) (1972,2783) 
DS: (32,859) (1216,1963) (2792,3971) 
Medley Phase (Final) Band Plan
US: (0,95) (868,1207) (1972,2783) 
DS: (32,859) (1216,1963) (2792,3971) 
       VDSL Port Details       Upstream        Downstream
Attainable Net Data Rate:      37662 kbps        107864 kbps
Actual Aggregate Tx Power:    -   1.9 dBm          12.5 dBm
============================================================================
  VDSL Band Status        U0      U1      U2      U3      D1      D2      D3
  Line Attenuation(dB):	 2.4	 12.4	 18.5	  N/A	 6.4	 14.8	 23.0	
Signal Attenuation(dB):	 2.4	 11.4	 17.7	  N/A	 6.4	 14.8	 23.0	
        SNR Margin(dB):	 22.2	 22.7	 22.5	  N/A	 13.8	 13.6	 13.6	
         TX Power(dBm):	-16.1	-31.2	-2.0	  N/A	 8.1	 8.0	 7.0

Thanks but how to do PRE tags?

In reply to a post by Brookzy:

Interesting. That must be an ISP 40/10-style cap then as IP profiles for upload are always 20 mbps aren't they?

MHC seems to think its a possible provisioning problem at Openreach end, as the BT WBC IP Profile is 20 Mbps every time I check the BTw speedtest. As I'm on consumer BT Infinity and its been the same for 18 months, I'm not going to risk the help(less) desk. The business desk is a lot better. One good reason to migrate to a new ISP

Type a [ bracket then type PRE then ] bracket before the text, and [ then /PRE and ] after.

All here in the FAQ (link in the top bar):
http://forums.thinkbroadband.com/faq_english.php#html

Comparing these other data, I can spot two main differences from mine: the attenuation seems much higher, and the SNRM much lower.

Are mine upstream TX Power(dBm): -16.1 -31.2 -2.0 are ok?

Edited by adslmax (Wed 26-Feb-14 20:57:27)

In reply to a post by Brookzy:

Comparing these other data, I can spot two main differences from mine: the attenuation seems much higher, and the SNRM much lower.

Length of line directly affects attenuation. SNRmargin also varies based on how much interference/noise, and the longer a line the more noise it will pick up so more margin needed to hold the connection.

My SNR is very high at 13.6dB on downstream? Are these healthy or bad?

With an attainable of 100+ mbps you can't have much to worry about...