General Discussion
  >> Fibre Broadband


Register (or login) on our website and you will not see this ad.


Pages in this thread: 1 | [2] | 3 | 4 | (show all)   Print Thread
Standard User deleted
(deleted) Tue 13-May-14 17:59:18
Print Post

Re: Cabinet Location


[re: MrSaffron] [link to this post]
 
So basically nobody knows where he gets the information from lol or he can't say
Standard User deleted
(deleted) Tue 13-May-14 18:07:23
Print Post

Re: Cabinet Location


[re: deleted] [link to this post]
 
You got it.
Standard User deleted
(deleted) Fri 23-May-14 22:07:39
Print Post

Re: Cabinet Location


[re: deleted] [link to this post]
 
I keep looking every day to see if the adsl/fibre checker is giving a date.... What I don't understand is why install a fibre cabinet and not set it live along with the other ones in my area.... Feeling very frustrated to say the least, even if it gives an estimated date, I will be happy.

Not sure if this a hint of when said cabinet goes live, but when I put postcode into availability checker on the bt whole sale site it says, FTTC multicast June 2014, but when I put phone number or address in that bit doesn't come up.... I really hope it comes soon

Edited by deleted (Fri 23-May-14 22:49:13)


Register (or login) on our website and you will not see this ad.

Standard User deleted
(deleted) Sat 24-May-14 08:44:15
Print Post

Re: Cabinet Location


[re: deleted] [link to this post]
 
Could be many reasons, power supply etc.
Standard User deleted
(deleted) Sat 24-May-14 16:02:38
Print Post

Re: Cabinet Location


[re: deleted] [link to this post]
 
In reply to a post by Midgetgem:
even if it gives an estimated date, I will be happy.

Unfortunately, some people didn't like it when the estimates proved badly wrong - and complained to ASA about it. The upshot is that it makes it less & less likely that you will get estimates nowadays.

Not sure if this a hint of when said cabinet goes live, but when I put postcode into availability checker on the bt whole sale site it says, FTTC multicast June 2014, but when I put phone number or address in that bit doesn't come up....

It probably means that your postcode is covered by more than one cabinet, and one of the others is live.

If you want to see the status of every property in your postcode, try the address checker, and enter only the postcode. That will give you a list of addresses you can work through, to see the status of each.
Standard User deleted
(deleted) Fri 30-May-14 20:28:28
Print Post

Re: Cabinet Location


[re: deleted] [link to this post]
 
I'm sure I've seen them connect the power line up, the road was dug up a few times. And it was installed about the same time as the rest of the new cabinets in my village but seems to be the only one not live yet. I'm getting impatient now lol
Standard User deleted
(deleted) Thu 05-Jun-14 15:59:50
Print Post

Re: Cabinet Location (UPDATE)


[re: deleted] [link to this post]
 
Just seem the guy working on the cabinet that provides our street and asked if it was definately cabinet 28, he said yes, so asked when will it be going live? He said he didn't know but it shouldn't be too much longer as he has just switched it on and then it's up to BT, so presume they will do some tests then it will go live? So there is finally light at the end of the tunnel smile

Edited by deleted (Thu 05-Jun-14 16:00:14)

Standard User deleted
(deleted) Thu 05-Jun-14 16:20:19
Print Post

Re: Cabinet Location (UPDATE)


[re: deleted] [link to this post]
 
Hopefully that was the electrical testing and certification in which case just commissioning before ready to accept orders
Standard User deleted
(deleted) Thu 05-Jun-14 16:28:08
Print Post

Re: Cabinet Location (UPDATE)


[re: deleted] [link to this post]
 
I hope so, I can't wait, I keep checking bt checker and the wholesale checker too everyday
Standard User deleted
(deleted) Thu 05-Jun-14 21:24:13
Print Post

Re: Cabinet Location (UPDATE)


[re: deleted] [link to this post]
 
How long does it take roughly to commission the new fibre cabinet?
Pages in this thread: 1 | [2] | 3 | 4 | (show all)   Print Thread

Jump to