General Discussion
  >> Fibre Broadband


Register (or login) on our website and you will not see this ad.


Pages in this thread: 1 | 2 | [3] | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | (show all)   Print Thread
Standard User MHC
(sensei) Fri 11-Sep-15 09:42:55
Print Post

Re: New FTTC connection/BT wiring questions


[re: deleted] [link to this post]
 
There is a Technicolor TG589vn - are you saying it will only work for ADSL?

The only point that actually jumps out is the attenuation and speed. If the DS atten is correct, then with the 6.2dB margin (SNR) the speed is correct - which points to a very noisy environment and if others close by are seeing similar speeds then there may be a localised noise source causing teh problems and very little you can do.

The graphs can give pointers to where problems may lie.

Can you borrow an HG612? (or buy a cheap one) to get additional stats and graphs?


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

M H C


taurus excreta cerebrum vincit
Standard User deleted
(deleted) Fri 11-Sep-15 09:50:27
Print Post

Re: New FTTC connection/BT wiring questions


[re: MHC] [link to this post]
 
Yeah, DSLStats will only work for ADSL/ADSL2 on this modem. You can check on this page - http://www.s446074245.websitehome.co.uk/routers.html

Note 2: TG589vn is VDSL2 capable, but DSLstats doesn't support it fully in VDSL2 mode.

Also, if you go to TBB BB Map and type in Yatton as town name, you'll see that all speed tests south of the station (where I am) never go above 40Mbit, though there are a few north of town that do. Either the lines here are extremely noisy or the cabinet doesn't support above 40Mbit speeds (is that still the case in certain places?)
Standard User deleted
(deleted) Fri 11-Sep-15 09:51:19
Print Post

Re: New FTTC connection/BT wiring questions


[re: MHC] [link to this post]
 
By the way, I also have a BT HH v3 from the previous house owner if you think that's worth a try?


Register (or login) on our website and you will not see this ad.

Administrator MrSaffron
(staff) Fri 11-Sep-15 10:02:09
Print Post

Re: New FTTC connection/BT wiring questions


[re: deleted] [link to this post]
 
All fttc cabinets support the 80/20 product just your distance from it being the deciding factor mainly

The author of the above post is a thinkbroadband staff member. It may not constitute an official statement on behalf of thinkbroadband.
Standard User MHC
(sensei) Fri 11-Sep-15 10:09:33
Print Post

Re: New FTTC connection/BT wiring questions


[re: deleted] [link to this post]
 
"Does not support fully" - can you try it and see what it does give.

All cabinets should support 80Mb - I don't know of any reason why any would be restricted.

How for to your cabinet - as the crow flies and by road.


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

M H C


taurus excreta cerebrum vincit
Standard User MHC
(sensei) Fri 11-Sep-15 10:10:39
Print Post

Re: New FTTC connection/BT wiring questions


[re: MrSaffron] [link to this post]
 
That was my initial thought - however 17dB should be giving a lot better than high 30s.


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

M H C


taurus excreta cerebrum vincit
Standard User deleted
(deleted) Fri 11-Sep-15 10:25:33
Print Post

Re: New FTTC connection/BT wiring questions


[re: MHC] [link to this post]
 
I did - it just says "No data returned for last sample" or something along those lines.

I don't know where my cabinet is. All I know is that that's Cabinet P4 in Yatton but I haven't seen near by. Any way to find out? It's all underground cabling here, nothing is coming over the poles.
Standard User MHC
(sensei) Fri 11-Sep-15 10:34:51
Print Post

Re: New FTTC connection/BT wiring questions


[re: deleted] [link to this post]
 
Walk or drive around ... either physically or on Google Maps. Start with: https://www.telecom-tariffs.co.uk/codelook.htm?xid=2... which gives a good approximation, then home in on it.


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

M H C


taurus excreta cerebrum vincit
Standard User keith969
(learned) Fri 11-Sep-15 11:16:08
Print Post

Re: New FTTC connection/BT wiring questions


[re: deleted] [link to this post]
 
Here's cab 3:

https://www.google.co.uk/maps/@51.3840107,-2.8130715...

I would guess cab 4 is not too far away but you'd have to look around to find it. Your exchange is to the SE off Wood Hill Road.
Standard User deleted
(deleted) Fri 11-Sep-15 11:30:33
Print Post

Re: New FTTC connection/BT wiring questions


[re: keith969] [link to this post]
 
Cab3 is quite a distance from me. Certainly more than a mile. Cab4 seems to cover a good bit of town and I am on the edge of it... which suggests that it is a bit of a distance. Need to hunt for it.
Pages in this thread: 1 | 2 | [3] | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | (show all)   Print Thread

Jump to