Openreach or BDUK

Is there anyway to determine if your cabinet will be upgraded to fibre by open reach or part of the BDUK rollout? Any known contact details?

Exchange: East Kilbride
Cab:147 ( currently "under review")

Thanks

Here's what I found for that cabinet

Phase BDUK Scot Government 12b

You can check for yourself here

In reply to a post by brianw:

Is there anyway to determine if your cabinet will be upgraded to fibre by open reach or part of the BDUK rollout? Any known contact details?

Exchange: East Kilbride
Cab:147 ( currently "under review")

Thanks

What's the Postcode?

Paul

post code is G75 9GX

That is postcode of the cabinet, or is that your postcode too? Some of the postcode appear connected to cab 116 which is live.

The looks show a DSLAM is present, so should be just down to the usual commissioning/fibre/power delays.

Edited by MrSaffron (Thu 01-Oct-15 16:45:19)

CHBMB, I must be dumb. What did you search for to get that detail on that website ?

Cheers

In reply to a post by brianw:

post code is G75 9GX

Will look in a few mins.

Paul

In reply to a post by MrSaffron:

That is postcode of the cabinet, or is that your postcode too? Some of the postcode appear connected to cab 116 which is live.

The looks show a DSLAM is present, so should be just down to the usual commissioning/fibre/power delays.

That postcode is spread over 3 cabinets shown below:

Exchange Name: East Kilbride
Exchange Code: WSEKI

Cabinet: 106, 116, 147
Fibre Phase: NOT CHECKED
Result Count: 58

[G75 9GX]
� Has 4 result(s) connected to Cabinet 116 with FTTC with approximate speeds around the following:
� Range A: 17.6 -> 30.0 (downstream) 2.5 -> 6.4 (upstream)
� Range B: 8.7 -> 23.5 (downstream) 1.2 -> 5.7 (upstream)

� Has 1 result(s) connected to Cabinet 106 with FTTC with approximate speeds around the following:
� Range A: 62.5 -> 80.0 (downstream) 20.0 -> 20.0 (upstream)
� Range B: 51.5 -> 75.6 (downstream) 15.6 -> 20.0 (upstream)

� Has 53 result(s) connected to Cabinet 147 with ADSLx with approximate speeds around the following:
� ADSLx (Worst): Up to 1.0 (downstream rate) -- (upsrteam rate) 1.0 to 3.0 (downstream range)
� ADSLx (Best): Up to 2.0 (downstream rate) -- (upsrteam rate) 1.5 to 3.5 (downstream range)

Please note that these speeds are using BT's DSL Checker and uses the lowest and highest values for that postcode and cabinet.
� Had at least 1 issue retrieving information from the BT DSL Checker.

Granted they are mostly on cabinet 147.

Paul

MrSaffron, thats my postcode, I also think thats the cabinet postcode too, but no number on it to verify.

Pretty sure that's the cabinet location

Fibre cabinets never have their number on them, can usually visually link to the copper cab by the new tarmac, but its possible this is an all in one has its TPON conversion area.