Looks like ECI G.INP is being rolled out! (On the downstream):

User on kitz reporting his ECI powered FTTC connection resynced to apply G.INP:

http://forum.kitz.co.uk/index.php?topic=17195.0

Hopefully the rollout won't take too long, can't wait to see what it does to my line

In reply to a post by dave2150:

In reply to a post by BatBoy:

Yes, they haven't and I don't think they will.

BT Openreach have helpfully turned off G.INP on the upstream for everyone to mask their buddies, BT Consumer, problems with the HH5A's.

In reference to aastatus.net/2127:

Update
Wednesday 10:36:31 Apologise for the delay in updating this post. BT have confirmed that all trial lines have been loaded with the new profiles, further to this BT have confirmed that all other affected lines have now had the new profiles loaded. That is all lines across all providers.

Disappointing

I wonder what genius at BT decided to buy thousands of cabinets that don't support G.INP.....

maybe that one genius with the gob, Neil mcrae according to google .He is Managing Director and Chief Architect., was he the one that thought packet loss was normal/acceptable?

Edited by tommy45 (Sun 06-Mar-16 21:00:36)

In reply to a post by gt94sss2:

In reply to a post by BatBoy:

Do you have any evidence that lantiq(owned by Intel) - support G.INP ?

Both the HH5A and T-Link TD-W990 use the same Lantiq VRX-268 modem chipset.

TP-Link issued new firmware in May 15 enabling the TD-W990 to work properly on G.INP lines . From their firmware notes:

Fixed the bug that the speed dropped on the BT line of UK when G.INP was enabled.

lets not forget that other BTOR supplied POS that isnt G.inp compatible the ECI modem that was supplied /installed by OR on many Huawei FTTC cabs, and then you have BT publish even more BS in their SIN documents about testing/ approving modem devices when they have supplied thousands of un tested in compatible devices themselves, it's like the blind leading the blind in BT

ECI cabs will never see G.inp (US+DS) and i doubt that BT will ever roll-out vectoring on a national scale, G.fast maybe, maybe not as again they would have to supply modems capable of g.fast speeds, and knowing BT they would get that wrong also

Edited by tommy45 (Sun 06-Mar-16 20:58:14)

In reply to a post by dave2150:

Looks like ECI G.INP is being rolled out! (On the downstream):

User on kitz reporting his ECI powered FTTC connection resynced to apply G.INP:

http://forum.kitz.co.uk/index.php?topic=17195.0

Hopefully the rollout won't take too long, can't wait to see what it does to my line

they where able to do this early last year or year before that (ECI modems. although was questionable) , but they cannot enable it on the upstream on the ECI modems or cabs without a hardware upgrade at cab level, and a firmware update of the eci modems, as it stands it's borked in some way or other for most of us

Edited by tommy45 (Sun 06-Mar-16 20:57:16)

In reply to a post by tommy45:

In reply to a post by dave2150:

Looks like ECI G.INP is being rolled out! (On the downstream):

User on kitz reporting his ECI powered FTTC connection resynced to apply G.INP:

http://forum.kitz.co.uk/index.php?topic=17195.0

Hopefully the rollout won't take too long, can't wait to see what it does to my line

they where able to do this early last year or year before that (ECI modems. although was questionable) , but they cannot enable it on the upstream on the ECI modems or cabs without a hardware upgrade at cab level, and a firmware update of the eci modems, as it stands it's borked in some way or other for most of us

G.INP has been disabled on ECI cabinets for a very long time.

I'm aware this is only for downstream, thats why I mentioned it in my post.

It's stil very good news that BT are finally rolling out downstream G.INP for those on ECI cabinets.

In reply to a post by dave2150:

It's stil very good news that BT are finally rolling out downstream G.INP for those on ECI cabinets.

Allegedly

In reply to a post by BatBoy:

In reply to a post by dave2150:

It's stil very good news that BT are finally rolling out downstream G.INP for those on ECI cabinets.

Allegedly

Nope, confirmed. He has uploaded his line stats.
https://www.mydslwebstats.co.uk/

Line stats can be faked

In reply to a post by BatBoy:

Line stats can be faked

Prepare to be proved wrong...

So, you can prove line stats can't be faked? Anyway one swallow doesn't make a summer.