Keep on digging mate.
http://forum.kitz.co.uk/index.php/topic,15921.msg315...

Edited by deleted (Sun 06-Mar-16 21:36:12)

Start your proof anytime....

In reply to a post by underzone:

In reply to a post by BatBoy:

Line stats can be faked

Prepare to be proved wrong...

Glad there's someone else with a brain here, who can see his stats uploaded to www.mydslwebstats.co.uk

You only have to fake them in DSLStats which will then upload them to MDWS.

In reply to a post by dave2150:

In reply to a post by tommy45:

In reply to a post by dave2150:

Looks like ECI G.INP is being rolled out! (On the downstream):

User on kitz reporting his ECI powered FTTC connection resynced to apply G.INP:

http://forum.kitz.co.uk/index.php?topic=17195.0

Hopefully the rollout won't take too long, can't wait to see what it does to my line

they where able to do this early last year or year before that (ECI modems. although was questionable) , but they cannot enable it on the upstream on the ECI modems or cabs without a hardware upgrade at cab level, and a firmware update of the eci modems, as it stands it's borked in some way or other for most of us

G.INP has been disabled on ECI cabinets for a very long time.

I'm aware this is only for downstream, thats why I mentioned it in my post.

It's stil very good news that BT are finally rolling out downstream G.INP for those on ECI cabinets.

I think the word disabled isn't the right term here, as ECI cabs were not G.inp compatible or still aren't, one reported case isn't really conclusive of any changes being made, if however other EU's that are connected to ECI cabs start to show G.inp active, then that would change things perhaps, but it was because of BT's ineptness that many on huawei cabs have lost out due to G.inp being disabled by default , because of the ECI blunder, so if they have finally got g.inp on eci cabs, when do the rest get g.inp enabled on the upstream again?

Edited by tommy45 (Sun 06-Mar-16 22:08:47)

I'd rather people not accuse me of lying/forgery just because their anti BT bias.

All I know is that Webstats says G.INP is active and that my actual sync increased by 3mbit.

Whatever you want from DSL Stats just ask for and I will provide.

Here's some Telnet stuff
xdslcmd info --stats
xdslcmd: ADSL driver and PHY status
Status: Showtime
Retrain Reason: 0
Last initialization procedure status: 0
Max: Upstream rate = 19237 Kbps, Downstream rate = 65888 Kbps
Bearer: 0, Upstream rate = 16995 Kbps, Downstream rate = 62696 Kbps
Bearer: 1, Upstream rate = 0 Kbps, Downstream rate = 0 Kbps
Link Power State: L0
Mode: VDSL2 Annex B
VDSL2 Profile: Profile 17a
TPS-TC: PTM Mode(0x0)
Trellis: U:ON /D:ON
Line Status: No Defect
Training Status: Showtime
Down Up
SNR (dB): 6.2 6.3
Attn(dB): 14.1 0.0
Pwr(dBm): 14.0 3.6
VDSL2 framing
Bearer 0
MSGc: -6 129
B: 243 236
M: 1 1
T: 0 7
R: 10 16
S: 0.1239 0.4443
L: 16397 4592
D: 1 1
I: 254 255
N: 254 255
Q: 8 0
V: 0 0
RxQueue: 51 0
TxQueue: 17 0
G.INP Framing: 18 0
G.INP lookback: 17 0
RRC bits: 0 24
Bearer 1
MSGc: 154 -6
B: 0 0
M: 2 0
T: 2 0
R: 16 0
S: 6.4000 0.0000
L: 40 0
D: 3 0
I: 32 0
N: 32 0
Q: 0 0
V: 0 0
RxQueue: 0 0
TxQueue: 0 0
G.INP Framing: 0 0
G.INP lookback: 0 0
RRC bits: 0 0
Counters
Bearer 0
OHF: 0 281477
OHFErr: 0 2
RS: 63275072 549198
RSCorr: 4 21
RSUnCorr: 0 0
Bearer 1
OHF: 122583 0
OHFErr: 0 0
RS: 1225214 0
RSCorr: 0 0
RSUnCorr: 0 0

Retransmit Counters
rtx_tx: 9 0
rtx_c: 1 0
rtx_uc: 0 0

G.INP Counters
LEFTRS: 0 0
minEFTR: 62660 0
errFreeBits: 1882405 0

Bearer 0
HEC: 0 0
OCD: 0 0
LCD: 0 0
Total Cells: 237363544 0
Data Cells: 10274204 0
Drop Cells: 0
Bit Errors: 0 0

Bearer 1
HEC: 0 0
OCD: 0 0
LCD: 0 0
Total Cells: 0 0
Data Cells: 0 0
Drop Cells: 0
Bit Errors: 0 0

ES: 0 2
SES: 0 0
UAS: 30 30
AS: 1970

Bearer 0
INP: 49.00 0.00
INPRein: 0.00 0.00
delay: 0 0

xdslcmd info --pbParams
xdslcmd: ADSL driver and PHY status
Status: Showtime
Retrain Reason: 0
Last initialization procedure status: 0
Max: Upstream rate = 19243 Kbps, Downstream rate = 65888 Kbps
Bearer: 0, Upstream rate = 16995 Kbps, Downstream rate = 62696 Kbps
Bearer: 1, Upstream rate = 0 Kbps, Downstream rate = 0 Kbps
Discovery Phase (Initial) Band Plan
US: (6,31) (882,1193) (1984,2770)
DS: (33,857) (1218,1959) (2795,4083)
Medley Phase (Final) Band Plan
US: (6,31) (882,1193) (1984,2770)
DS: (41,857) (1218,1959) (2795,4083)
VDSL Port Details Upstream Downstream
Attainable Net Data Rate: 19243 kbps 65888 kbps
Actual Aggregate Tx Power: 3.6 dBm 14.0 dBm
====================================================================================
VDSL Band Status U0 U1 U2 U3 U4 D1 D2 D3
Line Attenuation(dB): 0.1 14.8 23.1 N/A N/A 9.0 20.4 32.4
Signal Attenuation(dB): 0.1 14.7 23.1 N/A N/A 10.4 20.2 32.4
SNR Margin(dB): 8.0 6.6 6.2 N/A N/A 6.2 6.2 6.2
TX Power(dBm): -5.3 -40.8 3.1 N/A N/A 11.3 7.3 7.4
#

Edited by deleted (Mon 07-Mar-16 00:32:17)

What's your IP Profile for that sync rate?

You can find it from the further diagnostics option at www.speedtest.btwholesale.com
or http://www.speedtest.btwholesale.com/PerformanceTest...
or https://windows.mouselike.org/be/index.asp?DoAction=...

Thanks

IMG

That

Have reset once so
xdslcmd info --stats
xdslcmd: ADSL driver and PHY status
Status: Showtime
Retrain Reason: 0
Last initialization procedure status: 0
Max: Upstream rate = 19291 Kbps, Downstream rate = 65592 Kbps
Bearer: 0, Upstream rate = 16995 Kbps, Downstream rate = 62635 Kbps
Bearer: 1, Upstream rate = 0 Kbps, Downstream rate = 0 Kbps
Link Power State: L0
Mode: VDSL2 Annex B
VDSL2 Profile: Profile 17a
TPS-TC: PTM Mode(0x0)
Trellis: U:ON /D:ON
Line Status: No Defect
Training Status: Showtime
Down Up
SNR (dB): 6.1 6.4
Attn(dB): 14.1 0.0
Pwr(dBm): 14.0 3.6
VDSL2 framing
Bearer 0
MSGc: -6 129
B: 243 236
M: 1 1
T: 0 7
R: 10 16
S: 0.1240 0.4443
L: 16381 4592
D: 1 1
I: 254 255
N: 254 255
Q: 8 0
V: 0 0
RxQueue: 51 0
TxQueue: 17 0
G.INP Framing: 18 0
G.INP lookback: 17 0
RRC bits: 0 24
Bearer 1
MSGc: 154 -6
B: 0 0
M: 2 0
T: 2 0
R: 16 0
S: 6.4000 0.0000
L: 40 0
D: 3 0
I: 32 0
N: 32 0
Q: 0 0
V: 0 0
RxQueue: 0 0
TxQueue: 0 0
G.INP Framing: 0 0
G.INP lookback: 0 0
RRC bits: 0 0
Counters
Bearer 0
OHF: 0 1973935
OHFErr: 0 20
RS: 982408304 497349
RSCorr: 58 196
RSUnCorr: 0 0
Bearer 1
OHF: 1904186 0
OHFErr: 0 0
RS: 19041245 0
RSCorr: 0 0
RSUnCorr: 0 0

Retransmit Counters
rtx_tx: 52 0
rtx_c: 44 0
rtx_uc: 0 0

G.INP Counters
LEFTRS: 0 0
minEFTR: 62629 0
errFreeBits: 29210473 0

Bearer 0
HEC: 0 0
OCD: 0 0
LCD: 0 0
Total Cells: 3684114170 0
Data Cells: 9808597 0
Drop Cells: 0
Bit Errors: 0 0

Bearer 1
HEC: 0 0
OCD: 0 0
LCD: 0 0
Total Cells: 0 0
Data Cells: 0 0
Drop Cells: 0
Bit Errors: 0 0

ES: 0 19
SES: 0 0
UAS: 34 34
AS: 30588

Bearer 0
INP: 49.00 0.00
INPRein: 0.00 0.00
delay: 0 0
PER: 0.00 7.02
OR: 0.01 153.75
AgR: 62699.39 17148.51

Bearer 1
INP: 4.50 0.00
INPRein: 4.50 0.00
delay: 3 0
PER: 16.06 0.01
OR: 79.68 0.01
AgR: 79.68 0.01

Bitswap: 7138/7251 0/0

Total time = 8 hours 30 min 22 sec
FEC: 58 196
CRC: 0 20
ES: 0 19
SES: 0 0
UAS: 34 34
LOS: 0 0
LOF: 0 0
LOM: 0 0
Latest 15 minutes time = 22 sec
FEC: 0 0
CRC: 0 0
ES: 0 0
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Previous 15 minutes time = 15 min 0 sec
FEC: 0 2
CRC: 0 0
ES: 0 0
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Latest 1 day time = 8 hours 30 min 22 sec
FEC: 58 196
CRC: 0 20
ES: 0 19
SES: 0 0
UAS: 34 34
LOS: 0 0
LOF: 0 0
LOM: 0 0
Previous 1 day time = 0 sec
FEC: 0 0
CRC: 0 0
ES: 0 0
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Since Link time = 8 hours 29 min 47 sec
FEC: 58 196
CRC: 0 20
ES: 0 19
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
#

Woohoo! Ratio is 0.9669 (with)

G.INP is ready to launch on ECI cabs in the next couple of months.