General Discussion
  >> Fibre Broadband


Register (or login) on our website and you will not see this ad.


Pages in this thread: 1 | 2 | 3 | 4 | 5 | 6 | 7 | [8] | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | (show all)   Print Thread
Standard User Alnath
(fountain of knowledge) Thu 10-Mar-16 11:54:29
Print Post

Re: ECI FTTC Cabinets still don't support G.INP?


[re: deleted] [link to this post]
 
I've absolutely no idea if this is anything to do with anything but my max attainable has jumped by 6Mbit to the highest its been for a few years, the up stream has remained the same. This happened after Openreach were working on the cab.

HH 5 Type A to an ECI cab.
Standard User deleted
(deleted) Thu 10-Mar-16 12:02:28
Print Post

Re: ECI FTTC Cabinets still don't support G.INP?


[re: Alnath] [link to this post]
 
It's easy enough to check for G.INP.

Just get your IP Profile and your Sync Speed and then as it says in my sig,

Use the Ginp Formula to determine if your vdsl2 connection is with or without G.INP.
Divide your IP Profile by your Sync Speed and the answer is 0.9669 (with) or 0.9679 (without)
Standard User gt94sss2
(fountain of knowledge) Thu 10-Mar-16 12:21:23
Print Post

Re: ECI FTTC Cabinets still don't support G.INP?


[re: deleted] [link to this post]
 
In reply to a post by BatBoy:
It's easy enough to check for G.INP.

Just get your IP Profile and your Sync Speed and then as it says in my sig,


That works on Huawei cabs - you can't assume it will also work on the ECI ones..


Register (or login) on our website and you will not see this ad.

Standard User deleted
(deleted) Thu 10-Mar-16 12:59:40
Print Post

Re: ECI FTTC Cabinets still don't support G.INP?


[re: gt94sss2] [link to this post]
 
I can't see any reason why not.
Standard User RobertoS
(elder) Thu 10-Mar-16 13:25:55
Print Post

Re: ECI FTTC Cabinets still don't support G.INP?


[re: gt94sss2] [link to this post]
 
We know the 0.9679 works on ECI as it applied before G.INP was introduced.

It is possible BT Wholesale have two separate parameters for calculating the IP Profile under G.INP depending on the cabinet being Huawei or ECI, but I think extremely unlikely. I'd be very surprised if that information is even presented to the BT Wholesale DLM.

Kindness isn't going to cure the world of all its awfulness but it's a good place to begin. Daisy Ridley.
My broadband basic info/help site - www.robertos.me.uk. Domains, site and mail hosting - Tsohost.
Connection - AAISP Home::1 80/20. Sync 59504/15641kbps @ 600m. - BQM

Edited by RobertoS (Thu 10-Mar-16 13:26:20)

Standard User deleted
(deleted) Thu 10-Mar-16 20:38:58
Print Post

Re: ECI FTTC Cabinets still don't support G.INP?


[re: RobertoS] [link to this post]
 
We also know that the 0.9669 applies on an ECI cabinet with G.INP enabled smile

So it looks like we know everything. Case closed. Game over.
Standard User RobertoS
(elder) Thu 10-Mar-16 20:48:05
Print Post

Re: ECI FTTC Cabinets still don't support G.INP?


[re: deleted] [link to this post]
 
Ah yes, I forgot you have that now.

Kindness isn't going to cure the world of all its awfulness but it's a good place to begin. Daisy Ridley.
My broadband basic info/help site - www.robertos.me.uk. Domains, site and mail hosting - Tsohost.
Connection - AAISP Home::1 80/20. Sync 59504/15641kbps @ 600m. - BQM
Standard User Chrysalis
(legend) Fri 11-Mar-16 00:11:58
Print Post

Re: ECI FTTC Cabinets still don't support G.INP?


[re: RobertoS] [link to this post]
 
no resync here since my cab had the chipset upgrade 35 days ago.

Sky Fibre Pro BQM - IPv4
Standard User Alnath
(fountain of knowledge) Fri 11-Mar-16 10:41:13
Print Post

Re: ECI FTTC Cabinets still don't support G.INP?


[re: Chrysalis] [link to this post]
 
I was only 5 days in to the HH5 Type A reboot cycle and it has rebooted again this morning.

5. DSL uptime: 0 days, 05:44:34
6. Data rate: 20000 / 78639 lowest sync i have seen
7. Maximum data rate: 27611 lowest its ever been, not seen it below 33000 before / 108803 highest its been for years, although when the cab was empty it used to be 128000
Standard User dave2150
(experienced) Sat 12-Mar-16 12:42:04
Print Post

Re: ECI FTTC Cabinets still don't support G.INP?


[re: Chrysalis] [link to this post]
 
In reply to a post by Chrysalis:
no resync here since my cab had the chipset upgrade 35 days ago.


The user on the ECI cabinet who had G.INP enabled is still on the old chipset version (204), so sadly it's not an indication of an upcoming G.INP upgrade.

FTTC over 600M of good old Aluminium
http://www.speedtest.net/result/2869262320.png
Pages in this thread: 1 | 2 | 3 | 4 | 5 | 6 | 7 | [8] | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | (show all)   Print Thread

Jump to