General Discussion
  >> Fibre Broadband


Register (or login) on our website and you will not see this ad.


Pages in this thread: 1 | 2 | 3 | [4] | (show all)   Print Thread
Standard User tommy45
(knowledge is power) Thu 21-Apr-16 21:23:38
Print Post

Re: Plusnet to BT - DLM reset or not?


[re: WelshWArrior] [link to this post]
 
In reply to a post by WelshWArrior:
Thanks for all the replies all. So in essence, there should be no DLM reset and to keep G.inp active I should keep my trusty 8800nl then - correct?

I seem to remember reading somewhere that BT don't require a password set in the modem and that the username I use can be anything as long as it ends in @btbroadband.com - have I got that right?
Sounds about right to me so long as you ain't also changing between OR products as well as per my earlier post, definitely keep the billion especially if on a Huawei cab

Edited by tommy45 (Thu 21-Apr-16 21:26:52)

Standard User deleted
(deleted) Thu 21-Apr-16 21:43:46
Print Post

Re: Plusnet to BT - DLM reset or not?


[re: WelshWArrior] [link to this post]
 
No need to use the HH5 unless you also have BT TV or you want to allow BT Wifi users to use your connection.
Standard User WelshWArrior
(fountain of knowledge) Thu 21-Apr-16 22:06:01
Print Post

Re: Plusnet to BT - DLM reset or not?


[re: deleted] [link to this post]
 
Thanks all. Well I'll be keeping my beloved Billion then smile

Now fingers crossed the transfer goes smoothly!!

-------------------------------------------
Plusnet Unlimited Fibre Extra
Speedtest
My BQM


Register (or login) on our website and you will not see this ad.

Standard User Zarjaz
(eat-sleep-adslguide) Thu 21-Apr-16 22:42:16
Print Post

Re: Plusnet to BT - DLM reset or not?


[re: deleted] [link to this post]
 
Why else would a migration order be prevented being placed?

Most likely because of a 'computer says no' scenario. It won't allow you to allocate a new port because it says there's none spare .... (your current one isn't spare, you are using it)

Standard User deleted
(deleted) Thu 21-Apr-16 23:24:29
Print Post

Re: Plusnet to BT - DLM reset or not?


[re: Zarjaz] [link to this post]
 
In reply to a post by Zarjaz:
Why else would a migration order be prevented being placed?

Most likely because of a 'computer says no' scenario. It won't allow you to allocate a new port because it says there's none spare .... (your current one isn't spare, you are using it)


Indeed but why would a port need allocating if during a migration the port isn't changed?
Standard User deleted
(deleted) Thu 21-Apr-16 23:28:00
Print Post

Re: Plusnet to BT - DLM reset or not?


[re: deleted] [link to this post]
 
In reply to a post by lee111s:
Indeed but why would a port need allocating if during a migration the port isn't changed?
Quite.
Pages in this thread: 1 | 2 | 3 | [4] | (show all)   Print Thread

Jump to