General Discussion
  >> Fibre Broadband


Register (or login) on our website and you will not see this ad.


Pages in this thread: << 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | [20] | 21 | 22 | 23 | (show all)   Print Thread
Standard User deleted
(deleted) Thu 28-Apr-16 17:37:32
Print Post

Re: Irby Exchange Pt III


[re: deleted] [link to this post]
 
It's just a prospectice date. As the silver lock is now on it, expect it to be accepting orders very soon.
Standard User Irby
(knowledge is power) Thu 28-Apr-16 19:18:28
Print Post

Re: Irby Exchange Pt III


[re: Smithy99] [link to this post]
 
Fat lady isn't singing just yet, Tony wink
Standard User deleted
(deleted) Thu 28-Apr-16 19:32:10
Print Post

Re: Irby Exchange Pt III


[re: Irby] [link to this post]
 
In reply to a post by Irby:
Not sure what the bit about jumpers means. Presumably just niggles.

https://www.dropbox.com/s/hbur07xybq559er/Photo%2028...


This has been discussed before. A jumper in this context means the wires to and from the copper cabinet and the fibre cabinet.

They would be "left in" if the line previously had FTTC and the line had been ceased. If a line has never had FTTC service it couldn't have left in jumpers as there were never any FTTC jumpers to leave in.


Register (or login) on our website and you will not see this ad.

Standard User deleted
(deleted) Thu 28-Apr-16 20:45:48
Print Post

Re: Irby Exchange Pt III


[re: deleted] [link to this post]
 
So does this mean that they would have to go in and fit them then? I thought that the physical work on the cabinet was done
Standard User deleted
(deleted) Thu 28-Apr-16 21:27:43
Print Post

Re: Irby Exchange Pt III


[re: deleted] [link to this post]
 
In reply to a post by Lambert:
So does this mean that they would have to go in and fit them then? I thought that the physical work on the cabinet was done


When someone orders FTTC an engineer has to visit the cab to allocate the port to your line.
Standard User deleted
(deleted) Thu 28-Apr-16 21:30:04
Print Post

Re: Irby Exchange Pt III


[re: deleted] [link to this post]
 
Thank you for your words of reassurance (and hope!)- fingers crossed Cab 3 starts taking orders in the coming week or two smile
Standard User Irby
(knowledge is power) Fri 29-Apr-16 09:15:15
Print Post

Re: Irby Exchange Pt III


[re: deleted] [link to this post]
 
I tried to order with Zen last night, I wasn't hopeful but thought it was worth a phone call, as I expected not possible just yet even though the wording on http://www.homeandwork.openreach.co.uk/when-can-i-ge... says
We�re performing our final quality and safety checks in your area. We�ll let service providers know that Superfast connections are available in your area. ]Call your service provider to see if you can place your fibre order now


Has anyone tried to order via BT? maybe, just maybe they have more up to date status on the cabinet and can put an order through.

I've waited so long that I'm happy for a little longer to go via my preferred ISP.
Standard User Irby
(knowledge is power) Fri 29-Apr-16 09:55:51
Print Post

Re: Irby Exchange Pt III


[re: Irby] [link to this post]
 
Now accepting orders.
Standard User Irby
(knowledge is power) Fri 29-Apr-16 10:07:38
Print Post

Re: Irby Exchange Pt III


[re: Irby] [link to this post]
 
If anyone else orders via Zen, at first they will say it's not available, ask them to check the tags on your line, then you'll be able to order.
10 working days /drums fingers
Standard User Smithy99
(experienced) Sun 08-May-16 09:11:11
Print Post

Re: Irby Exchange Pt III


[re: Irby] [link to this post]
 
In reply to a post by Irby:
If anyone else orders via Zen, at first they will say it's not available, ask them to check the tags on your line, then you'll be able to order.
10 working days /drums fingers


I hope you are having better luck than I am with Plusnet, first order wasn't passed on to Openreach so a new order was placed with completion date of the 3/5/16 that came and went, apparently that was only a provisional date so now it's the 9/5/16. Let's see what happens tomorrow.....
Pages in this thread: << 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | [20] | 21 | 22 | 23 | (show all)   Print Thread

Jump to