General Discussion
  >> Fibre Broadband


Register (or login) on our website and you will not see this ad.


Pages in this thread: 1 | [2] | 3 | (show all)   Print Thread
Standard User deleted
(deleted) Sat 18-Mar-17 13:08:44
Print Post

Re: Vectoring


[re: kasg] [link to this post]
 
Same here, though I still don't see the logic in rolling out to selected places. Surely the thought of rolling it out nationally has crossed Openreach's mind.
Standard User deleted
(deleted) Sat 18-Mar-17 13:13:00
Print Post

Re: Vectoring


[re: witchunt] [link to this post]
 
Interesting you mention that. Do you know if there is a vectoring trial in Cumbria? I noticed my sync speed and max attainable shoot up a week or two ago.
Standard User deleted
(deleted) Sat 18-Mar-17 13:16:39
Print Post

Re: Vectoring


[re: deleted] [link to this post]
 
Your signature says "20CN ADSL Max", I think this only applies to VDSL2.

Edited by deleted (Sat 18-Mar-17 13:17:12)


Register (or login) on our website and you will not see this ad.

Standard User deleted
(deleted) Sat 18-Mar-17 13:18:32
Print Post

Re: Vectoring


[re: deleted] [link to this post]
 
My signature was incorrect, I have had FTTC since November. Updated now.

Edited by deleted (Sat 18-Mar-17 13:19:43)

Standard User deleted
(deleted) Sat 18-Mar-17 13:21:35
Print Post

Re: Vectoring


[re: deleted] [link to this post]
 
Thanks. What modem do you have? Do you have access to line stats that shows the vectoring state? 1 is enabled, 5 is disabled.
Standard User deleted
(deleted) Sat 18-Mar-17 13:24:47
Print Post

Re: Vectoring


[re: deleted] [link to this post]
 
Unfortunately just the Home Hub 6/Smart Hub.

This is the information I can find on the Technical Log

DSL uptime: 5 Days, 10 Hours 34 Minutes 13 Seconds

Data rate: 7.52 kbps / 40.75 kbps

Maximum data rate: 7517 / 39989

Noise margin: 5.7 / 3.2

Line attenuation: 27.6

Signal attenuation:

VPI / VCI: 0/38

Modulation: G_993_2_ANNEX_B

Latency type: Fast Path
Standard User witchunt
(member) Sat 18-Mar-17 13:33:05
Print Post

Re: Vectoring


[re: deleted] [link to this post]
 
A small number of cabinets in Cumbria have been upgraded
Standard User Zarjaz
(eat-sleep-adslguide) Sat 18-Mar-17 13:33:45
Print Post

Re: Vectoring


[re: deleted] [link to this post]
 
I would suggest that is more likely to be to do with this looking at the downstream SNR.

Standard User witchunt
(member) Sat 18-Mar-17 13:34:48
Print Post

Re: Vectoring


[re: deleted] [link to this post]
 
Think itshe more aimed at Long Reach VDSL than boosting those with superfast speeds already
Standard User deleted
(deleted) Sat 18-Mar-17 13:40:01
Print Post

Re: Vectoring


[re: deleted] [link to this post]
 
Yes, that increase is due to the new downstream SNR margin rollout, not vectoring. An output of the vectoring state would be required to determine if vectoring was enabled on your line.
Pages in this thread: 1 | [2] | 3 | (show all)   Print Thread

Jump to