Thanks. I don't have a lot of confidence that it will, as I just rang BT and they said "Someone is looking into it today, but I don't have a time written here."

Edited by deleted (Tue 04-Apr-17 11:50:23)

Yeah, all done here. NTE5 and MK3 replaced with a master socket 5c and MK4, DLM reset done and back on the bog standard interleaved profile atm. The engineer said they cannot do full DLM resets (downstream reset to fastpath) anymore. Hopefully, G.INP will be back soon.

Edited by deleted (Tue 04-Apr-17 13:47:19)

Glad you got yours' sorted. Wish me luck for later. Doubt they'll even send me an engineer!!

You've got to be assertive and keep checking that they've got it right, otherwise you could get a telephony engineer! Good luck!

Yeah, Downstream FEC is working very hard right now!

xDSL
Mode VDSL2
Traffic Type PTM
Status Up
Link Power State L0
Downstream Upstream
Line Coding (Trellis) On On
SNR Margin (dB) 6.3 5.9
Attenuation (dB) 23.9 0.0
Output Power (dBm) 12.2 6.2
Attainable Rate (Kbps) 41586 7900
Rate (Kbps) 35133 7900
B (# of bytes in Mux Data Frame) 51 239
M (# of Mux Data Frames in an RS codeword) 1 1
T (# of Mux Data Frames in an OH sub-frame) 64 42
R (# of redundancy bytes in the RS codeword) 12 0
S (# of data symbols over which the RS code word spans) 0.0471 0.9653
L (# of bits transmitted in each data symbol) 10872 1989
D (interleaver depth) 687 1
I (interleaver block size in bytes) 64 120
N (RS codeword size) 64 240
Delay (msec) 8 0
INP (DMT symbol) 3.00 0.00
OH Frames 1080388 320361
OH Frame Errors 2 7
RS Words 276495685 660868
RS Correctable Errors 1500783 0
RS Uncorrectable Errors 5 0
HEC Errors 0 0
OCD Errors 0 0
LCD Errors 0 0
Total Cells 220864699 0
Data Cells 4941722 0
Bit Errors 0 0
Total ES 1 6
Total SES 0 0
Total UAS 30 30

Edited by deleted (Tue 04-Apr-17 14:31:06)

What were you banded at?

I know you'll think I'm mad, but 35000/7200. With G.INP and 3/6 dB I got nearly 48000/8700.

Surprised that my copper pair is "perfect" to say how many downstream FEC's there are! Believe it or not, though, the engineer said the minimum downstream rate for my line was 20.6 Mbps! Seems extremely low to me!

Edited by deleted (Tue 04-Apr-17 19:29:17)

Current line stats:

xDSL
Mode VDSL2
Traffic Type PTM
Status Up
Link Power State L0
Downstream Upstream
Line Coding (Trellis) On On
SNR Margin (dB) 6.1 6.1
Attenuation (dB) 23.9 0.0
Output Power (dBm) 12.2 6.2
Attainable Rate (Kbps) 41571 7900
Rate (Kbps) 35133 7900
B (# of bytes in Mux Data Frame) 51 239
M (# of Mux Data Frames in an RS codeword) 1 1
T (# of Mux Data Frames in an OH sub-frame) 64 42
R (# of redundancy bytes in the RS codeword) 12 0
S (# of data symbols over which the RS code word spans) 0.0471 0.9653
L (# of bits transmitted in each data symbol) 10872 1989
D (interleaver depth) 687 1
I (interleaver block size in bytes) 64 120
N (RS codeword size) 64 240
Delay (msec) 8 0
INP (DMT symbol) 3.00 0.00
OH Frames 26865695 7966321
OH Frame Errors 26 156
RS Words 2582566834 1823637
RS Correctable Errors 30649852 0
RS Uncorrectable Errors 70 0
HEC Errors 7 0
OCD Errors 0 0
LCD Errors 0 0
Total Cells 1197206865 0
Data Cells 116300710 0
Bit Errors 0 0
Total ES 13 131
Total SES 0 1
Total UAS 30 30

Would dread to think about the stability on fastpath...

Edited by deleted (Wed 05-Apr-17 16:49:32)

Any update on the broadband boost engineer appointment?