General Discussion
  >> Fibre Broadband


Register (or login) on our website and you will not see this ad.


Pages in this thread: 1 | [2] | (show all)   Print Thread
Standard User deleted
(deleted) Mon 31-Jul-17 20:43:41
Print Post

Re: Bt infinity 2 speed increase


[re: deleted] [link to this post]
 
Maybe, maybe not.
Standard User deleted
(deleted) Mon 31-Jul-17 21:03:53
Print Post

Re: Bt infinity 2 speed increase


[re: deleted] [link to this post]
 
5. DSL uptime: 6 days, 03:10:43
6. Data rate: 19978 / 76343
7. Maximum data rate: 29186 / 80628
8. Noise margin: 11.1 / 4.7
9. Line attenuation: 16.7 / 15.5
10. Signal attenuation: 16.6 / 15.5

This is my stats at the minute seems ok I guess?
Standard User deleted
(deleted) Mon 31-Jul-17 21:08:01
Print Post

Re: Bt infinity 2 speed increase


[re: deleted] [link to this post]
 
You may already be on a 5dB target margin.

If the line is stable and error free, it might drop further allowing a little more speed.


Register (or login) on our website and you will not see this ad.

Standard User deleted
(deleted) Mon 31-Jul-17 21:16:01
Print Post

Re: Bt infinity 2 speed increase


[re: deleted] [link to this post]
 
I don't tend to get faults the or resets unless there's an update
Standard User deleted
(deleted) Thu 31-Aug-17 23:14:08
Print Post

Re: Bt infinity 2 speed increase


[re: deleted] [link to this post]
 
Data rate: 20.00 Mbps / 79.60 Mbps
Maximum data rate: 29359 / 81436
Noise margin: 15.6 dB / 5.3 dB
Line attenuation: 15.6 dB
Signal attenuation:
VPI / VCI:
Now got a hub 6 from bt been up now for 3 days and these are my stats. Still looking good?
Standard User Banger
(eat-sleep-adslguide) Thu 31-Aug-17 23:49:20
Print Post

Re: Bt infinity 2 speed increase


[re: deleted] [link to this post]
 
Can't get much better than that on FTTC.

Tim
www.uno.net.uk & freenetname
Asus DSL-N55U and ZyXEL VMG1312-B10A Bridge on 80 Meg LLU Fibre
https://www.thinkbroadband.com/speedtest/15025669961...

Current Sync: 79195/17469

My Broadband Ping
Pages in this thread: 1 | [2] | (show all)   Print Thread

Jump to