It�s possible but that wouldn�t account for the latency increase from 13-15ms to bbc.co.uk and now min 21ms.

My first hope after my router is 21ms and used to be around 13, this only changed when the connection got to max speed.

To me it looks more like vectoring. Please can you post the result of the adsl info --vectoring command from the CLI?

In reply to a post by MrSaffron:

900m means zero benefit from a G.fast pod

MrSaffron what about 250m?

See table on https://www.thinkbroadband.com/how-broadband-works

Didn't realise vectoring was rolled out now by BT OR?

It would certainly make sense though. My line is capable of full sync if there is a local power outage, my HG612 must beat the other routers to sync so very little crosstalk.

Standard interleaved I sync at 55/20.

G.INP activated 61/20.

Not had OR bring the SNR down on this line yet.

Edited by wolvesmad (Fri 08-Sep-17 18:25:57)

Yes, for some cabinets which have a lot of customers far from them in order to help meet the USO.

Edited by deleted (Fri 08-Sep-17 18:31:58)

There is currently no USO in place in the UK.
Vectoring is sometimes deployed on BDUK funded cabinets to help meet properties passed targets with "superfast" speeds.

I believe that's what you meant to say

Yep, that's it! I was trying to decide if it was that or the "hopefully planned" USO. Thanks for confirming.

Edited by deleted (Fri 08-Sep-17 20:00:57)

xdslcmd info --vectoring
xdslcmd: ADSL driver and PHY status
Status: Showtime
Retrain Reason: 0
Last initialization procedure status: 0
Max: Upstream rate = 24214 Kbps, Downstream rate = 80472 Kbps
Bearer: 0, Upstream rate = 19999 Kbps, Downstream rate = 79997 Kbps
Bearer: 1, Upstream rate = 0 Kbps, Downstream rate = 0 Kbps
Vectoring state: 5
VCE MAC Address: 0:0:0:0:0:0
Total error samples Ethernet pkts sent: 0
Total error samples Ethernet pkts discarded: 0
Total error samples statuses sent: 0
Total error samples statuses discarded: 0
#

Vectoring status: 5 (VECT_UNCONFIGURED)