General Discussion
  >> Fibre Broadband


Register (or login) on our website and you will not see this ad.


  Print Thread
Standard User wolvesmad
(fountain of knowledge) Sat 27-Jan-18 11:43:44
Print Post

Stuck profile?


[link to this post]
 
Noticed my IP address has changed recently so had a look on DSL stats and to my surprise, G.INP and a 3db SNR has been enabled.

Stats recorded 27 Jan 2018 11:39:39

DSLAM/MSAN type: BDCM:0xb12d / v0xb12d
Modem/router firmware: AnnexA version - A2pv6C038m.d24j
DSL mode: VDSL2 Profile 17a
Status: Showtime
Uptime: 3 days 6 hours 40 min 27 sec
Resyncs: 0 (since 27 Jan 2018 11:39:34)

Downstream Upstream
Line attenuation (dB): 14.6 0.0
Signal attenuation (dB): Not monitored
Connection speed (kbps): 72072 20000
SNR margin (dB): 3.4 9.3
Power (dBm): 13.8 6.6
Interleave depth: 8 1
INP: 54.00 0
G.INP: Enabled Not enabled
Vectoring status: 5 (VECT_UNCONFIGURED)

RSCorr/RS (%): 0.0021 0.0000
RSUnCorr/RS (%): 0.0000 0.0000
ES/hour: 0 30.0

Only issue is, i'm still getting my previous throughput speed of 54Mb/20Mb.

Does this mean my profile is stuck?

-

TalkTalk FTTC 60|20Mb
Standard User RobertoS
(elder) Sat 27-Jan-18 14:29:30
Print Post

Re: Stuck profile?


[re: wolvesmad] [link to this post]
 
It isn't stuck in the sense of the BT Wholesale IP Profile which used to get stuck at times, as it doesn't apply on TalkTalk FTTC. Only on BT Wholesale ISPs.

You need to ask TalkTalk why the throughput is low, I think.

My broadband basic info/help site - www.robertos.me.uk. Domains, site and mail hosting - Tsohost.
Connection - AAISP Home::1 80/20. 200GB. Sync 75808/13984Kbps @ 600m. BQMs - IPv4 & IPv6
  Print Thread

Jump to