BTw Checker changed: gained more speed?

Has anyone notice it?

Before:

house 1:
80 / 72.6 20 / 19
80 / 69.9 20 / 19
230.8 / 172.6 34 / 14.9
189.1 / 130.2 23 / 11.4

house 2:
80 / 74 20 / 19
80 / 73.8 20 / 19
237.5 / 176.4 35.3 / 15.7
195.1 / 137.4 24.3 / 11.8

house 3:
80 / 74 20 / 19
80 / 73.8 20 / 19
244.6 / 180.4 36.5 / 16.5
202.6 / 143.6 25.1 / 12.4

house 4:
80 / 74 20 / 19
80 / 73.8 20 / 19
255.9 / 186.5 38.8 / 17.8
212 / 150.8 26.8 / 13.4

house 5:
80 / 74 20 / 19
80 / 73.8 20 / 19
263.6 / 190.3 40.3 / 18.7
219.6 / 158 27.9 / 13.8

house 6:
80 / 77.2 20 / 19
80 / 75.7 20 / 19
330 / 330 50 / 43.5
330 / 324.7 50 / 31.3

house 7:
80 / 72.6 20 / 19
80 / 69.9 20 / 19
255.9 / 186.5 38.8 / 17.8
212 / 150.8 26.8 / 13.4

house 8:
80 / 72.6 20 / 19
80 / 69.9 20 / 19
186.3 / 147.3 25.9 / 10.3
145.1 / 96.5 16.7 / 8

house 9:
80 / 74 20 / 19
80 / 73.8 20 / 19
240.9 / 178.4 35.9 / 16.1
199 / 140.5 24.7 / 12

house 10:
80 / 77.2 20 / 19
80 / 75.7 20 / 19
330 / 330 50 / 43.5
330 / 324.7 50 / 31.3

house 11:
80 / 74 20 / 19
80 / 73.8 20 / 19
263.6 / 190.3 40.3 / 18.7
219.6 / 158 27.9 / 13.8

house 12:
80 / 74 20 / 19
80 / 73.8 20 / 19
240.9 / 178.4 35.9 / 16.1
199 / 140.5 24.7 / 12

Now:

All houses now getting 80 to 77 / 20 to 19 and 330 to 300 / 43 to 50

Seem rather odd?

https://ibb.co/VghwB9R

Why do you have 12 random houses estimates documented in the 1st place?

I couldn't tell you my own estimates never mind my nearest 11 neighbours.

Because my line has changed yesterday by DLM

DSLAM type / SW version: BDCM:0xa4a1 (164.161) / v0xa4a1
Modem/router firmware: AnnexA version - A2pvfbH043q.d26u
DSL mode: VDSL2 Profile 17a
Status: Showtime
Uptime: 15 hours 50 min 30 sec
Resyncs: 0 (since 18 Aug 2020 11:55:37)

Downstream Upstream
Line attenuation (dB): 10.0 0.0
Signal attenuation (dB): Not available on VDSL2
Connection speed (kbps): 79999 19999
SNR margin (dB): 9.0 17.0
Power (dBm): 12.4 2.0
Interleave depth: 16 1
INP: 48.00 0
G.INP: Enabled Not enabled
Vectoring status: 5 (VECT_UNCONFIGURED)

xdslctl info --stats
xdslctl: ADSL driver and PHY status
Status: Showtime
Last Retrain Reason: 0
Last initialization procedure status: 0
Max: Upstream rate = 27133 Kbps, Downstream rate = 97332 Kbps
Bearer: 0, Upstream rate = 19999 Kbps, Downstream rate = 79999 Kbps
Bearer: 1, Upstream rate = 0 Kbps, Downstream rate = 0 Kbps
Link Power State: L0
Mode: VDSL2 Annex B
VDSL2 Profile: Profile 17a
TPS-TC: PTM Mode(0x0)
Trellis: U:ON /D:ON
Line Status: No Defect
Training Status: Showtime
Down Up
SNR (dB): 9.0 17.0
Attn(dB): 10.0 0.0
Pwr(dBm): 12.4 2.0

I have asked PN for GEA Test requested because I want to see if the line length estimated has changed? I know it always at around 243metres away from my old line atten at 11.1dB back to last year summer.

Why does any of this matter? You have the actual line statistics available to you, that is better information than any checker can give you regarding performance.

Checker estimates do change over time. They certainly change in response to actual measured line rates, as I've observed this. I suspect they also change as the mathematical models of line rates are tweaked.

Because that is all he/she/it bangs on about.

and seems to live in a magical land where ADSL2, VDSL2, G.Fast and Virgin Cable are available.

On those services being available to them, its not that unusual at all, and believe that these options are available to them.

In reply to a post by danielhyde:

and seems to live in a magical land where ADSL2, VDSL2, G.Fast and Virgin Cable are available.

Christchurch and surrounding area is just one instance. Some have native or fttp too.