General Discussion
  >> Fibre Broadband


Register (or login) on our website and you will not see this ad.


Pages in this thread: 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | [9] | 10 | 11 | 12 | 13 | (show all)   Print Thread
Standard User alanplum241276
(newbie) Fri 12-Mar-21 10:17:54
Print Post

Re: BTNet Leased Line with Unifi Dream Machine Pro


[re: connormill] [link to this post]
 
In reply to a post by connormill:
it's not, but if your circuit is ordered as Multimode presentation, only multimode will work. if you order singlemode presentation, then only singlemode will work.

The Copper port is 10/100 only and wont be used on circuits above a 100mbps bearer


Surely if you change the SFP in the access side from MM to SM then it will still work?

For example, I was supplied with a MM SFP from OpenReach, but I'm currently using a SM DAC and I have a green link. Just removed the MM SFP and put the DAC in.

I cant confirm 100% that it works yet, as I'm still waiting for the network side to go green.
Standard User jpm
(member) Fri 12-Mar-21 11:01:40
Print Post

Re: BTNet Leased Line with Unifi Dream Machine Pro


[re: connormill] [link to this post]
 
In reply to a post by connormill:
it's not, but if your circuit is ordered as Multimode presentation, only multimode will work. if you order singlemode presentation, then only singlemode will work.

The Copper port is 10/100 only and wont be used on circuits above a 100mbps bearer


The ADVA port is gigabit. If a gigabit bearer is ordered then it will be presented as fibre, but if the bearer is ordered as 100Mbps and installed after 2017 it can be remotely upgraded to gigabit by Openreach, at which point the copper port will negotiate at 1Gbps.

https://www.openreach.co.uk/orpg/home/updates/briefi...

Edited by jpm (Fri 12-Mar-21 11:13:42)

Standard User Pheasant
(experienced) Fri 12-Mar-21 14:09:17
Print Post

Re: BTNet Leased Line with Unifi Dream Machine Pro


[re: jpm] [link to this post]
 
Wonder if any CP's take advantage of the copper port for Gig service for their 'wires only' customers? It was never mentioned in my case.

Its not widely advised or published that I'm aware of - the clear steer for wires only only is to the SFP port which is more adaptable anyhow.

My Broadband Speed Test


Register (or login) on our website and you will not see this ad.

Standard User jpm
(member) Fri 12-Mar-21 14:51:47
Print Post

Re: BTNet Leased Line with Unifi Dream Machine Pro


[re: Pheasant] [link to this post]
 
I don't think you can actually order a gig bearer with a copper handoff, it's just for the situations where a bearer is being upgraded. The idea is that an ISP can sell a customer a faster speed without any physical changes needing to be made.
Standard User Pheasant
(experienced) Fri 12-Mar-21 15:33:41
Print Post

Re: BTNet Leased Line with Unifi Dream Machine Pro


[re: jpm] [link to this post]
 
Ah I see. Couldn’t get to the explanatory notes in your link above.

My Broadband Speed Test
Standard User alanplum241276
(newbie) Wed 17-Mar-21 11:47:54
Print Post

Re: BTNet Leased Line with Unifi Dream Machine Pro


[re: Pheasant] [link to this post]
 
Well unfortunately I'm still without service.

OpenReach has gone back with a successful "fit and test" but apparently BT are having issues with the "Data Build"? Something to do with adding a table at the exchange?

Does anyone actually know how to decipher that?

Thanks
Standard User Pheasant
(experienced) Wed 17-Mar-21 12:34:39
Print Post

Re: BTNet Leased Line with Unifi Dream Machine Pro


[re: alanplum241276] [link to this post]
 
Sounds to me like BT haven't finished building the layer 2/3 stuff; VLANs and/or IP addressing on their routers. Is the network light green?

My Broadband Speed Test
Standard User alanplum241276
(newbie) Wed 17-Mar-21 13:00:38
Print Post

Re: BTNet Leased Line with Unifi Dream Machine Pro


[re: Pheasant] [link to this post]
 
In reply to a post by Pheasant:
Sounds to me like BT haven't finished building the layer 2/3 stuff; VLANs and/or IP addressing on their routers. Is the network light green?


No, it's still amber. It went amber when the OR engineer finished the last splice...
Standard User Pheasant
(experienced) Wed 17-Mar-21 17:47:35
Print Post

Re: BTNet Leased Line with Unifi Dream Machine Pro


[re: alanplum241276] [link to this post]
 
In reply to a post by alanplum241276:
No, it's still amber. It went amber when the OR engineer finished the last splice...

Network LED was green here several days before handover. I think on my circuit they had time to complete all configs, whilst I had the (somewhat unexpected) internal cabling issue, which took a few weeks to resolve. When we were finally spliced up everything was "there" pretty much.

Looks like amber LED on ADVA could be any of following. Suggests that the network link build/config hasn't been sorted yet

https://postimg.cc/R625wyk7

My Broadband Speed Test
Standard User alanplum241276
(newbie) Wed 17-Mar-21 21:03:36
Print Post

Re: BTNet Leased Line with Unifi Dream Machine Pro


[re: Pheasant] [link to this post]
 
In reply to a post by Pheasant:
Network LED was green here several days before handover. I think on my circuit they had time to complete all configs, whilst I had the (somewhat unexpected) internal cabling issue, which took a few weeks to resolve. When we were finally spliced up everything was "there" pretty much.

Looks like amber LED on ADVA could be any of following. Suggests that the network link build/config hasn't been sorted yet

https://postimg.cc/R625wyk7


Sounds reasonable. I have been constantly pinging the BT transit address (my next hop) from a different provider and it’s not been pinging. I can only assume that once it starts pinging the network LED will go green.
Pages in this thread: 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | [9] | 10 | 11 | 12 | 13 | (show all)   Print Thread

Jump to