The addition of the copper gigabit interface option has been brought up previously https://forums.thinkbroadband.com/fibre/t/4678849-bt...

In reply to a post by Pheasant:

Done a bit of digging and it would appear that the RJ45 port was added as a valid interface to the Openreach EAD spec from Rev 2.0 (May 2020) of the Supplier Information Note. See latest SIN v2.1 in force from November 2020.

Thank you for the link. I knew I had read the information from somewhere and it was not a dream!

My EAD service went live in March and although I was happy with the SFP interface, there are of course others that would like to use the copper port for 1G/1G services. But it wasn’t offered, to my knowledge, by my CP.

For a "wires", not a managed, service it really depends upon what equipment the end-user would like to connect to the Adva FSP150, of course.

I do wonder who the service provider is of the OP, if they ever return 🤣

Yes, indeed.

In reply to a post by tdw42:

The addition of the copper gigabit interface option has been brought up previously https://forums.thinkbroadband.com/fibre/t/4678849-bt...

Ah, yes, having looked at that post it all comes back to me. Thank you.

In reply to a post by tdw42:

The addition of the copper gigabit interface option has been brought up previously https://forums.thinkbroadband.com/fibre/t/4678849-bt...

Right you are…and I totally forgot I had replied to your post in that thread too!

I will ask my CP if the copper port is active on my service, either automatically or manually. In theory it should be. I could manually check but it’s a bit of a faff swapping fibre and copper modules on the router.