In reply to a post by branflakes:

In reply to a post by PaulKirby:

Same, I am in Newham, I am in Manor Park to be exact.
I have the exact same issue with IPv6 when doing the BQM, I don't think I am getting packet loss when using the actual connection via IPv6.

I'm also Manor Park - E12 6 - it's a small world!

I am E12 5 here and yes it is LOL.

In reply to a post by branflakes:

Thanks for confirming, I was worried it was just my connection but seems like it's not. My Google Meet experience could've been a bad VPN so will review again now sans VPN. I ended up switching v6 off my main LAN subnet but keeping it on the lab subnet so all the homelab kit has functioning v6 connectivity. Work has kept me far too busy so haven't extensively tested on that as of yet.

Do let us know what CF say!

Yeah, I was thinking it was mine due to I wasn't using their supplied router, and I already had to phone them to clear the MAC's in their Cache so that my router could connect.
I have to have IPv6 enabled internally due to some of my stuff uses it like NAS Storage etc.

In reply to a post by branflakes:

Do let us know what CF say!

Well its already been about 5 days, but their help desk did say that they was very busy atm, I have also sent them a tweet to show there are issues over IPv6, so I will see what happens.

Paul

In reply to a post by Pheasant:

Crikey you're probably neighbours, just shout out the window! 😀

LOL, well Manor Park is not a small area, but yeah LOL

Paul

In reply to a post by PaulKirby:

In reply to a post by Pheasant:

Crikey you're probably neighbours, just shout out the window! 😀

LOL, well Manor Park is not a small area, but yeah LOL

Paul

I jest but yeah, wonder if its a common network element a router, switch blade etc that's common to you both.

In reply to a post by Pheasant:

In reply to a post by PaulKirby:

In reply to a post by Pheasant:

Crikey you're probably neighbours, just shout out the window! 😀

LOL, well Manor Park is not a small area, but yeah LOL

Paul

I jest but yeah, wonder if its a common network element a router, switch blade etc that's common to you both.

It could very well be just that, I know their lower 127 block of IPv4 Address (masking I am being given) are all GEO Located to Manor Park.

Paul

Looks like they have POP's and peer in Telehouse North and Equinix in the Docklands and Slough. Their speed tester on Ookla always gives me a mighty fine latency result from my London address, probably as my provider has peering in the same datacentre. So its all sub millisecond.

Not sure how far from the POP's they have further distribution gear. Some of their larger grey street cabs may have either mini OLTs or L2/3 switches in them.

TBB single thread reads around 385 today, I've even tried a separate machine to rule out configuration issues. Multi-thread results are consistently above 900.

Trying some speedtest.net single thread gives results in the 300-550Mbit range to London servers.

Hey Branflakes

Is IPv6 is completely dead for you, its completely down for me.

Paul

In reply to a post by PaulKirby:

Hey Branflakes

Is IPv6 is completely dead for you, its completely down for me.

Paul

All good here! Was awake into the small hours working on something - so was working at 1am at least.

Whats your IPv6 BQM like ?

Mine is all red.

Paul

Here's mine (the red is because the firewall was screwing with ICMP and I was redoing some of cabling in the rack) but it's working now. Still have the fringe packet loss however.