General Discussion
  >> Fibre Broadband


Register (or login) on our website and you will not see this ad.


Pages in this thread: 1 | [2] | 3 | 4 | 5 | (show all)   Print Thread
Standard User Mtx
(member) Tue 10-Aug-21 13:49:32
Print Post

Re: Jurassicfibre Barnstaple


[re: Miggle] [link to this post]
 
I'm North Devon. I don't have an exact date, though contract signed a few months ago etc. Just waiting for them to call me any day to sort a date.
Standard User Miggle
(regular) Tue 10-Aug-21 14:44:50
Print Post

Re: Jurassicfibre Barnstaple


[re: Mtx] [link to this post]
 
fingers crossed it should be anytime soon then!
Standard User Mtx
(member) Tue 10-Aug-21 18:28:25
Print Post

Re: Jurassicfibre Barnstaple


[re: Miggle] [link to this post]
 
Indeed, I have been nagging the poor business manager for weeks smile


Register (or login) on our website and you will not see this ad.

Standard User Miggle
(regular) Tue 10-Aug-21 20:42:51
Print Post

Re: Jurassicfibre Barnstaple


[re: Mtx] [link to this post]
 
In reply to a post by Mtx:
What is latency like?

Just Did a test to cloudflare and I'm getting 14.5 ms, and an average of 13.2 ms - anything below 20 is excellent, so I'm happy with that.
Standard User Pheasant
(fountain of knowledge) Tue 10-Aug-21 21:28:47
Print Post

Re: Jurassicfibre Barnstaple


[re: Miggle] [link to this post]
 
Just curious, is that through WifI or wired connection back to their box?
Standard User Miggle
(regular) Tue 10-Aug-21 21:42:09
Print Post

Re: Jurassicfibre Barnstaple


[re: Pheasant] [link to this post]
 
Wired, tested from my main router back to their box
Standard User Pheasant
(fountain of knowledge) Tue 10-Aug-21 21:47:09
Print Post

Re: Jurassicfibre Barnstaple


[re: Miggle] [link to this post]
 
👍 Thanks, was just curious if there was anything 'on top' from WiFi.
Standard User Miggle
(regular) Tue 10-Aug-21 21:51:53
Print Post

Re: Jurassicfibre Barnstaple


[re: Pheasant] [link to this post]
 
having my router plugged into their modem adds around 1.5 ms of latency. So if I just used their modem directly I could shave a little off. Bit geeky of me to check that, but there you go! laugh
Standard User Mtx
(member) Wed 11-Aug-21 18:27:07
Print Post

Re: Jurassicfibre Barnstaple


[re: Miggle] [link to this post]
 
I'm going to be using my Draytek to keep one of the old FTTC lines for redundancy. ATM they are load balanced.

For PPPPE they estimate 50mbit of overheads on the download side. Is this something that you have experienced? Do they give you any log in to their router? I have asked for bridged mode purely for full network control my end of ports etc.
Standard User Mtx
(member) Wed 11-Aug-21 18:47:13
Print Post

Re: Jurassicfibre Barnstaple


[re: Miggle] [link to this post]
 
In reply to a post by Miggle:
In reply to a post by Mtx:
What is latency like?

Just Did a test to cloudflare and I'm getting 14.5 ms, and an average of 13.2 ms - anything below 20 is excellent, so I'm happy with that.


I just ran a test from one of my FTTC connections and latency to there is 13.4. I was hoping for a small improvement going to FTTP, but at the end of the day its the upload speed I want the most. As long as it is stable and not worse by any measure I'll be happy.
Pages in this thread: 1 | [2] | 3 | 4 | 5 | (show all)   Print Thread

Jump to