Edited by deleted (Fri 13-May-22 00:49:29)

In reply to a post by Buggs8:

All I know is that I get 1Gbps both ways and I have a 5 hour fix time and a number to call if I need help anytime. I have a 10Gbps port on my Mac so I get well over the 940/940 other people get - I will do a speed test tomorrow when I log back in

How do you get well over 940/940? Unless.you are somehow aggregating another WAN connection - its not physically possible to exceed the port speed on that EAD service - irrespective of your LAN port speed on the Mac.

In reply to a post by Buggs8:

I could have sworn I got about 1050mbps both ways - I will check tomorrow i'm on another connection and not on the main system

I said I didn't know much about this system. I was told that to get the full speed of this system I had to upgrade from the standard 1Gbps port as that only gets about 940 max - and I should go for a 2.5Gbps adapter as a minimum but as I am on a 10Gbps bearer I thought it best to upgrade my machine to that as I wouldn't mind 2 or even 3Gbps when needed.

Interesting. But how....

That ADVA box you linked a picture to is *not* capable of supporting a 10 Gbps bearer. Its an FSP 150-GE100 series box probably an FSP 150-GE102Pro

For you my friend I present Flip Fantasia....

If you upgraded they would probably replace the Adva for something that could do 10Gbps - no point though in providing more expensive hardware for a line that doesn't need it.

In reply to a post by Buggs8:

This is what I had installed. The top box has the CD case thing in it.

https://ibb.co/Y3j0bdL

In reply to a post by Buggs8:

In reply to a post by Pheasant:

Interesting. Is that a recent install? Who is your service provider?

BTNet - been in just over 6 months

So its been installed 6 months? which means November 2021 if my maths is correct. The picture was taken on 21 April 2022 (3 weeks ago) but the circuit appears to have nothing connected to it.

Can anyone else verify that.

In reply to a post by dect:

Can anyone else verify that.

Wasn't just me then.

Edited by jchamier (Fri 13-May-22 11:38:01)