This would also explain why you can get a little more than the 940Mbps, when you connect with a 10G ethernet connection. The line runs at 10G, but overall IP traffic is limited to 1G by a configured policer, not by the speed of a 1Gbps ethernet port. Most likely the policer is set to allow slightly more than 1G through, to ensure they are meeting their side of the bargain.
Those rules on having to advertise services by throughput not line rate don't apply to leased lines. A gigabit leased line is usually provisioned at either exactly 1G or at 1.024G due to 'historical' reasons. BT Wholesale don't overprovision.
Either way doesn't apply here - that ADVA NTE isn't a 10G box so 1.05G isn't happening.



Pages in this thread:
Print Thread
