General Discussion
  >> Fibre Broadband


Register (or login) on our website and you will not see this ad.


Pages in this thread: 1 | [2] | 3 | 4 | 5 | (show all)   Print Thread
Standard User daern
(regular) Tue 30-Apr-24 15:57:27
Print Post

Re: Fibre is being blown into the roads!


[re: Bobby_Valentino] [link to this post]
 
In reply to a post by Bobby_Valentino:
I had another one ... 4) Will alt nets newly laid fibre (along the street) connect to to Openreachs existing FTTC DSLAM located up the road, which in turn uses BT's fibre back to the BT telephone exchange?

No, they use the physical stuff (poles, ducts, inspection boxes and exchanges) but none of OR's connectivity. So everything they put in will be in parallel to any existing or future OR (or, indeed, other altnet's) fibre deployment. Round here, they're not even using the local exchanges, but are deploying a much wider area from a single, central exchange than would traditionally be done with copper, so their fibre runs in the ground right past my local exchange and away down the road towards the next town where it will actually terminate.

Edited by daern (Tue 30-Apr-24 15:57:57)

Standard User ian72
(eat-sleep-adslguide) Tue 30-Apr-24 16:00:57
Print Post

Re: Fibre is being blown into the roads!


[re: gorebrush] [link to this post]
 
True. Slip of the keyboard...
Standard User jpm
(fountain of knowledge) Tue 30-Apr-24 16:04:46
Print Post

Re: Fibre is being blown into the roads!


[re: gorebrush] [link to this post]
 
Is it though? My understanding is that Openreach manage the assets, but BT own them.


Register (or login) on our website and you will not see this ad.

Standard User ParksidePeter
(regular) Tue 30-Apr-24 16:41:19
Print Post

Re: Fibre is being blown into the roads!


[re: ian72] [link to this post]
 
In reply to a post by ian72:
2) Yes, BT fibre would be blown alongside an alt nets fibre - multiple fibres can share the same ducting.


Being pedantic maybe, but the fibre in the photos isn't being blown. It's being pushed/pulled.
The only fibre blowing most of us are likely to see is for the final link, in my case from the BT chamber to my house via the existing BT duct on behalf of CityFibre.
Photo of fibre blowing kit at customer end:
https://1drv.ms/i/s!AkhvgPvXD0_1oukobLJHynjhsKNgaw?e...
Standard User ian72
(eat-sleep-adslguide) Tue 30-Apr-24 16:49:37
Print Post

Re: Fibre is being blown into the roads!


[re: ParksidePeter] [link to this post]
 
I just used the term as it was the term the OP was used to - the actual method of getting the fibre through the duct isn't overly significant but point taken.
Standard User gorebrush
(regular) Tue 30-Apr-24 16:53:21
Print Post

Re: Fibre is being blown into the roads!


[re: Bobby_Valentino] [link to this post]
 
I suppose you could argue it is BT Group that owns openreach though, so apologies for any implied snark before.
Standard User candlerb
(knowledge is power) Tue 30-Apr-24 16:56:28
Print Post

Re: Fibre is being blown into the roads!


[re: Bobby_Valentino] [link to this post]
 
In reply to a post by Bobby_Valentino:
4) Will alt nets newly laid fibre (along the street) connect to to Openreachs existing FTTC DSLAM located up the road, which in turn uses BT's fibre back to the BT telephone exchange?

Note that even Openreach's FTTP network in most cases doesn't go via the FTTC cabinets.

Each FTTC cabinet connects to a "fibre aggregation node" (usually underground), which has a trunk cable back to a Head End Exchange, which is one of the larger ones where the OLTs are situated.

Customer FTTP connections go to a splitter (also usually underground) which connects directly to a fibre aggregation node.

Therefore, you could remove the cabinets and the FTTP network would remain as-is.

In a few cases, cabinets contain a "subtended headend" which is a small powered OLT. This reduces the number of spine fibres required to the fibre aggregation node, and can extend the reach. But it's the exception, rather than the rule.
Standard User Bobby_Valentino
(fountain of knowledge) Tue 30-Apr-24 17:45:12
Print Post

Re: Fibre is being blown into the roads!


[re: candlerb] [link to this post]
 
In reply to a post by candlerb:
Also you can check for streetworks permits in your area on https://bidb.uk/

This shows that Hey!Broadband is planned.

Am I right in saying that F & W Network Ltd is the wholesaler and companies like Hey!Broadband will use their network?
Standard User behuk
(regular) Tue 30-Apr-24 18:29:15
Print Post

Re: Fibre is being blown into the roads!


[re: Bobby_Valentino] [link to this post]
 
In reply to a post by Bobby_Valentino:
This shows that Hey!Broadband is planned.

Am I right in saying that F & W Network Ltd is the wholesaler and companies like Hey!Broadband will use their network?


Yes -- Hey!Broadband are the "anchor tenant" for F&W's network. Hey Broadband Ltd is wholly owned by F & W Networks Ltd.
Standard User Bobby_Valentino
(fountain of knowledge) Wed 01-May-24 10:52:06
Print Post

Re: Fibre is being blown into the roads!


[re: daern] [link to this post]
 
In reply to a post by daern:
In reply to a post by Bobby_Valentino:
I had another one ... 4) Will alt nets newly laid fibre (along the street) connect to to Openreachs existing FTTC DSLAM located up the road, which in turn uses BT's fibre back to the BT telephone exchange?

No, they use the physical stuff (poles, ducts, inspection boxes and exchanges) but none of OR's connectivity. So everything they put in will be in parallel to any existing or future OR (or, indeed, other altnet's) fibre deployment. Round here, they're not even using the local exchanges, but are deploying a much wider area from a single, central exchange than would traditionally be done with copper, so their fibre runs in the ground right past my local exchange and away down the road towards the next town where it will actually terminate.

I'm really struggling to find a network map for these altnets. Is there a diagram that shows on a high level diagram of the network diagram (fibre cabinet equivalent, exchange equivalent etc...), if they are not utilising BT's fibre cabs/exchanges?

Edited by Bobby_Valentino (Wed 01-May-24 11:05:04)

Pages in this thread: 1 | [2] | 3 | 4 | 5 | (show all)   Print Thread

Jump to