In reply to a post by Terryphi:

adslmax, one more question : where in the VX230v router menu is the setting?

Here is it

https://i.postimg.cc/4NRrvTKr/Screenshot(4).png
https://i.postimg.cc/3J3tJr0y/Screenshot(5).png
https://i.postimg.cc/pTDBR32s/Screenshot(6).png
https://i.postimg.cc/76ygsXg0/Screenshot(7).png

Hope this help you with this screenshot!

adslmax Yes very helpful. Is DSLWAN deleted before creation of EWAN or after?

For clarity Max previously stated below

In reply to a post by adslmax:

Go to Advanced mode and on the left side under Network mode, click DSLWAN and deleted it. Now add EWAN below:

ISP List - Other
VLAN ID: untick box (FTTP do not use it)
Internet Connection Type: PPPoE
Username: input your ISP username
Password: input your ISP password

In reply to a post by Terryphi:

adslmax Yes very helpful. Is DSLWAN deleted before creation of EWAN or after?

Deleted DSLWAN first then add EWAN (but don't do it until your FTTP go live first from engineer on the day of your FTTP activated or otherwise your normal VDSL2 will no longer work if you did deleted DSLWAN)

Hope this help.

Edited by adslmax (Thu 29-Jan-26 10:18:38)

PCJM thanks. Perfectly clear now.

adslmax Thanks for all your help.

In reply to a post by Terryphi:

adslmax Thanks for all your help.

Good luck with your FTTP. I know IDNet are good isp and they use TP Link VX230v for all FTTP up to 1Gig. Let us know how you get on with FTTP.

In reply to a post by Terryphi:

IDnet suggests that "I do not need to worry about that and the engineer will take care of it all".

I think IDNet do have TR-069 auto-configuration send to TP Link VX230v on it own when changing from SOGEA to FTTP. If not, then you know my manual setup help here.

Edited by adslmax (Thu 29-Jan-26 10:39:33)

In reply to a post by adslmax:

I think IDNet do have TR-069 auto-configuration send to TP Link VX230v on it own when changing from SOGEA to FTTP. If not, then you know my manual setup help here.

Chicken and egg might be inherent in that for OP's situation. Can TR-069 work without logon credentials in place and being logged on?