|
|
Orange Bright Box router now changed to EE and Fibre settings have appeared. 
Go > Advanced Set-Up > [Accept] > migration wizard
migration wizard
This function will help you to change your router settings. It's quick and easy to change the settings by choosing one of the options below :
Press this button if you want to move to Fibre / Ethernet - [Fibre / Ethernet]
Press this button if you want to move to ADSL - [ADSL]
Your router is currently set to the default Broadband Type: ADSL
|
|
|
Where? Not here it hasn't! And no "Migration Wizard".
When did you last re-connect? I haven't for 7 days.
1999: Freeserve 48K Dial-Up => 2005: Wanadoo 1 Meg BB => 2007: Orange 2 Meg BB => 2008: Orange 8 Meg LLU => 2010: Orange 16 Meg LLU => 2011: Orange 19 Meg WBC
|
|
|
Where? Not here it hasn't! And no "Migration Wizard".
When did you last re-connect? I haven't for 7 days. This afternoon I rebooted my brightbox router and it changed the colour scheme from orange to their EE pale green and the Fibre setting appeared, also a mobile broadband page. 
Mobile Broadband
This page provides settings to mobile broadband service.
Mobile broadband service: [Enable] [Disable]
Status
Status: Not Detected
Signal:
Network: ---
Time Connected: ---
Downstream Throughput: ---
Upstream Throughput: ---
Optional PIN Code
Current PIN Code
|
|
Register (or login) on our website and you will not see this ad.
|
|
|
Hello All,
Please find the article on new firmware.
New BrightBox wireless router firmware
Gavin
Orange Home Broadband
'Here to help'
|
|
The above post has been made by an ISP REPRESENTATIVE (although not necessarily the ISP being discussed in the post).
|
|
|
Does this automatic update depend on the TR069 module function being enabled?
Is it possible to supply this new firmware as an ordinary download?
1999: Freeserve 48K Dial-Up => 2005: Wanadoo 1 Meg BB => 2007: Orange 2 Meg BB => 2008: Orange 8 Meg LLU => 2010: Orange 16 Meg LLU => 2011: Orange 19 Meg WBC
|
|
|
Does this automatic update depend on the TR069 module function being enabled?
Almost certainly. TR069 is responsible for checking and updating firmware.
Oliver.
|
|
|
Does this automatic update depend on the TR069 module function being enabled?
Is it possible to supply this new firmware as an ordinary download? I would like this as well please
|
|
|
|
yes the firmware update is deployed via the TR069 remote management protocol and it sounds like its deployed over night and for the next few weeks
|
|
|
You sure of which one? Cuz the BrightBox has both a TR069 module function and a Remote Management function separate from each other.
1999: Freeserve 48K Dial-Up => 2005: Wanadoo 1 Meg BB => 2007: Orange 2 Meg BB => 2008: Orange 8 Meg LLU => 2010: Orange 16 Meg LLU => 2011: Orange 19 Meg WBC
|
|
|
Hi Mike,
I thought you would be interested as well as Fibre changes to the firmware, we have added
MTU to 1500 for PPPoA,
increased the number of devices that can be reserved IP adresses
offline mode for reserved IP addresses
Regards
Gavin
Orange Home Broadband
'Here to help'
|
|
The above post has been made by an ISP REPRESENTATIVE (although not necessarily the ISP being discussed in the post).
|
|
|
Hi XraySpex,
The firmware will only be deployed remotely either by the tr069 or an agent on the telephone.
Thanks
Gavin
Orange Home Broadband
'Here to help'
|
|
The above post has been made by an ISP REPRESENTATIVE (although not necessarily the ISP being discussed in the post).
|
|
|
Yes, Thanks! It auto deployed here at about 10 AM today.
Now I am able to increase MTU to 1500 and it works ( ping -f -l 1472 www.bbc.co.uk)
1999: Freeserve 48K Dial-Up => 2005: Wanadoo 1 Meg BB => 2007: Orange 2 Meg BB => 2008: Orange 8 Meg LLU => 2010: Orange 16 Meg LLU => 2011: Orange 19 Meg WBC
|
|
|
Hi Gavin,
I like to thank you and all those back at Orange/EE for listening to our concerns about the original BrightBox and including them in the upgraded EE firmware as well as noticing that some of your 'secret' pages had been hacked 
1999: Freeserve 48K Dial-Up => 2005: Wanadoo 1 Meg BB => 2007: Orange 2 Meg BB => 2008: Orange 8 Meg LLU => 2010: Orange 16 Meg LLU => 2011: Orange 19 Meg WBC
|
|
|
When I called Orange tech support, one of the agents said there was not any new firmware, even though I told him about the anouncement on the Orange website. Another agent also said that they were not able to force the update to my brightbox, or send me the firmware to load!
Would welcome your thoughts Gavin.
Also do we have a change log?
Edited by deleted (Wed 07-Nov-12 15:10:35)
|
|
|
|
If other dynamic DNS providers were added (like the free ones on ddwrt/openwrt) this modem would be pretty close to perfect.
|
|
|
My router rebooted itself just after midnight and cleared all its log, unlike a normal dropped connection/re-sync, more like yesterday's firmware deployment.
What's it up to? Is it repeating auto firmware deployment?
1999: Freeserve 48K Dial-Up => 2005: Wanadoo 1 Meg BB => 2007: Orange 2 Meg BB => 2008: Orange 8 Meg LLU => 2010: Orange 16 Meg LLU => 2011: Orange 19 Meg WBC
|
|
|
Hi huggons,
PM your details to me and I'll have a look. We are rolling out the firmware within this month.
Gavin
Gavin
Orange Home Broadband
'Here to help'
|
|
The above post has been made by an ISP REPRESENTATIVE (although not necessarily the ISP being discussed in the post).
|
|
|
|
Post deleted by huggons
|
|
|
Delete this post and PM as asked.
Very unwise to post your personal details on open Web.
1999: Freeserve 48K Dial-Up => 2005: Wanadoo 1 Meg BB => 2007: Orange 2 Meg BB => 2008: Orange 8 Meg LLU => 2010: Orange 16 Meg LLU => 2011: Orange 19 Meg WBC
|
|
|
|
Still not been deployed on mine, any idea when the daytime updates are scheduled for? I have called and asked EE support but they were clueless.
|
|
|
Have you disabled Remote Management and/or TR069 on it?
1999: Freeserve 48K Dial-Up => 2005: Wanadoo 1 Meg BB => 2007: Orange 2 Meg BB => 2008: Orange 8 Meg LLU => 2010: Orange 16 Meg LLU => 2011: Orange 19 Meg WBC
|
|
|
|
Wouldnt have a clue how to, to be honest.....
|
|
|
Minor update on this, I had to hard-reboot my router last night as the config page froze. The new firmware has now appeared
|
Pages in this thread: 
Print Thread
deleted
