|
|
Im having some real problems in getting this to work, l have downloaded the relevent file for my router(speedtouch546).
Problem is lm trying to be able to adjust my snr but after clicking on special then misc options then clicking on unlock experimental area the slider bar to adjust the snr is just plain grey and no options l have posted some screenshots to hopefully show people what lm trying to say.
http://img140.imageshack.us/my.php?image=dmt200710281316ur5.png
http://img148.imageshack.us/my.php?image=dmt200710280704sp8.png
Thanks
|
|
|
|
You dont appear to have been logged into the router in the 1st pic, when you were displaying the noise margin adjustment.
If you login to the router using DMT and go there again it should allow you to adjust it.
|
|
|
|
Ive tried loging into DMT using my login and password details suppiled by UKFSN the same l used to log into the router but it wont connect to DMT the login and password tabs just flash red.
Any more help please.
Thanks
|
|
Register (or login) on our website and you will not see this ad.
|
|
|
you log in to the router with something like admin and admin
Phil
666 kbytes/s with Demon
TalkTalk Dictionary : "Free" =
|
|
|
I think the default for a Speedtouch is Administrator for user and nothing (i.e. leave blank) for the password. The OP could try telnetting into it first (probably 192.168.1.254) and if that works put the same settings into DMT.
Edited by deleted (Sun 28-Oct-07 18:20:20)
|
|
|
|
Tried logging in using admin and admin but no joy.
|
|
|
|
You appeared to have managed to login to the router using DMT in the 2nd picture.
|
|
|
|
Just tried logging in as Administrator and leaving the password blank thought it had worked but then l was just the same as the pic in link 2 of my first post ie no option of unlocking the hidden area to even get to the snr slider bar.
|
|
|
So what you're saying is you get something like this but the Noisemargin slider is greyed out?
Edited to say - Sorry, just realised - as rogan8 says in your second picture you appear to be logged in. Do you get the expected menu, can you check the right box and if so what then happens?
Edited by deleted (Sun 28-Oct-07 18:43:51)
|
|
|
|
|
|
|
|
Except it's not like mine, as the last two tabs are missing. Your picture doesn't show your menus at the top. Can you get Special/Misc.Options/, can you check the "unlock experimental area" box, and what happens when you click "Save/Close"
Just in case something is going wrong with the login, can you telnet in?
|
|
|
|
that looks fine. what's wrong with it in your opinion?
|
|
|
|
supermantis is trying to get the two extra tabs (modemoptions and moptions2) that will enable him/her to adjust the SNR margin.
|
|
|
|
Do you get the expected menu, can you check the right box and if so what then happens?
If you mean can l click on special then click on misc options then click on unlock experimental area then no l cant check the right box.
Sorry to appear dumb mate.
Just out of curriosity version of my speedtouch 546 is 6.2.17.5......could this be the problem?
Thanks
|
|
|
|
What is telnet in Colin?
Thanks
Aaron
|
|
|
|
Could be - I'm not up on 546 firmware. You did install v7.34 of DMT didn't you?
How far along the menu route can you get?
|
|
|
Start/Run and then type in cmd and Return. That should open a DOS window. Type in telnet 192.168.1.254 and Return. Enter Administrator for user, just hit Return again for the password and you should have a nice fancy Speed touch graphic. Type exit to break the connection and again to exit.
Edited by deleted (Sun 28-Oct-07 19:10:00)
|
|
|
|
Thanks Colin will give that a try.
Just read this on another forum "The DMT tool will only work with firmware up to 6.1.4.3 I don't think there will be a version that works with the 6.2 firmware Thomson have removed the ability to adjust the SNR margin from the firmware"
|
|
|
It depends on the model. For the 585 like mine firmware 6.1 is adjustable, 6.2 onwards isn't. It isn't DMT's fault - Thomson removed the functionality that DMT presents in a user-friendly form. This could well be your problem.
Edited to say - I've just checked another posting and I'm pretty sure 6.2 onwards firmware won't adjust the SNR margin for any Speedtouch model.
Edited by deleted (Sun 28-Oct-07 19:18:19)
|
|
|
|
Might try to get an older firmware and try that Colin.
Many thanks mate.
Aaron
|
|
|
|
No probs. Good luck! There are recent posts on thinkbroadband about how to downgrade if that's what you decide to do.
|
Pages in this thread: 
Print Thread
supermantis
