General Discussion
  >> General Broadband Chatter


Register (or login) on our website and you will not see this ad.


Pages in this thread: 1 | 2 | (show all)   Print Thread
Standard User slimj
(member) Fri 13-Dec-19 11:56:17
Print Post

March 2020 USO


[link to this post]
 
Hi, I understand the updated USO comes in to force in March 2020 but I wanted some clarification regarding the minimum speeds.

My sync speed is normally around:-
- 25Mpbs down
- 1Mbps up (currently just below this at about 980Kbps)

In order for the USO to be met, do both up and down speeds need to be above the minimum limit? Or, if my upload is below 1Mbps but my download is higher, could I potentially get help towards a faster connection?

Currently trying to get information from Openreach regarding the fibre cabling that runs past my property and what the potential is for connecting to the joint on my pole in the near future - I'm happy get a quote for FTTPoD but don't really want to pay out £250 for a survey to find a whole new set of cables need to be run and the price is too high (the ducts should definitely be clear however!). Unfortunately Openreach just give standard generic replies that offer no help whatsoever...!
Standard User gary333
(member) Fri 13-Dec-19 13:08:22
Print Post

Re: March 2020 USO


[re: slimj] [link to this post]
 
Sorry, cannot help in anyway with your question however just wanted to say that the upload you get is terrible.

My 1970's 1.1km line going in to a ECI cabinet (that's nearly maxed out with users) was only getting 19-20mb, however the upload was always between 5.5-6mb.
Standard User ian72
(eat-sleep-adslguide) Fri 13-Dec-19 13:49:42
Print Post

Re: March 2020 USO


[re: slimj] [link to this post]
 
Are you on ADSL or FTTC?

The USO is 10Mb/s down and 1Mb/s up. The 980Kb/s could well be just low enough to kick you in to the USO.

Openreach aren't generally going to answer individual queries as they could get millions of people asking questions and never be able to respond to them all - the time taken to answer the questions would probably be fairly chunky as they would need to check each individual situation which could mean reviewing a number of sources of information.


Register (or login) on our website and you will not see this ad.

Administrator MrSaffron
(staff) Fri 13-Dec-19 14:26:22
Print Post

Re: March 2020 USO


[re: ian72] [link to this post]
 
Also USO is with BT rather than Openreach, so its up to BT to decide

Ofcom says 1 Mbps upload sync speed, which is either 1000 Kbps or 1024 Kbps, so in theory USO help available, but that help just be here is a 4G router at £x/month

The author of the above post is a thinkbroadband staff member. It may not constitute an official statement on behalf of thinkbroadband.
Standard User deleted
(deleted) Fri 13-Dec-19 14:27:14
Print Post

Re: March 2020 USO


[re: slimj] [link to this post]
 
My understanding is that a FTTPoD desktop survey costs nothing however such surveys often tend to be higher than the subsequent £250 survey.
Standard User slimj
(member) Fri 13-Dec-19 15:03:52
Print Post

Re: March 2020 USO


[re: gary333] [link to this post]
 
Yes, our line is probably around 1.5km from the cabinet! I'm quite surprised we managed to get the download speeds we do - generally happy with around 25Mbps but the upload is terrible (but in line with DSLChecker stats).
Standard User kitcat
(experienced) Fri 13-Dec-19 15:03:54
Print Post

Re: March 2020 USO


[re: slimj] [link to this post]
 
slimj

Use the checker at https://www.dslchecker.bt.com/ and look at the observed speeds results.

If there are any figures there and the upload is under 1Mb my take is you will be eligible for the USO, but what you are offered may not be what you would like (eg 4g Router).

If you are already on FTTC your upload looks odd as I would expect it to be higher with a 25Mb download. You may improve things by checking wiring etc.
Standard User slimj
(member) Fri 13-Dec-19 15:06:53
Print Post

Re: March 2020 USO


[re: ian72] [link to this post]
 
In reply to a post by ian72:
Are you on ADSL or FTTC?

The USO is 10Mb/s down and 1Mb/s up. The 980Kb/s could well be just low enough to kick you in to the USO.

Openreach aren't generally going to answer individual queries as they could get millions of people asking questions and never be able to respond to them all - the time taken to answer the questions would probably be fairly chunky as they would need to check each individual situation which could mean reviewing a number of sources of information.


Thanks. We're on FTTC but a long line. ADSL we were 3Mbps down.

Understand your point about the enquiry, it's just unfortunate that engineers will say send Openreach an email then you can't get the info you perhaps need.
Standard User slimj
(member) Fri 13-Dec-19 15:09:23
Print Post

Re: March 2020 USO


[re: MrSaffron] [link to this post]
 
In reply to a post by MrSaffron:
Also USO is with BT rather than Openreach, so its up to BT to decide

Ofcom says 1 Mbps upload sync speed, which is either 1000 Kbps or 1024 Kbps, so in theory USO help available, but that help just be here is a 4G router at £x/month


Thanks, will perhaps take a further look come March. 4G does tend to be pretty terrible in our area also (outside on O2).
Standard User slimj
(member) Fri 13-Dec-19 15:13:30
Print Post

Re: March 2020 USO


[re: kitcat] [link to this post]
 
In reply to a post by kitcat:
slimj

Use the checker at https://www.dslchecker.bt.com/ and look at the observed speeds results.

If there are any figures there and the upload is under 1Mb my take is you will be eligible for the USO, but what you are offered may not be what you would like (eg 4g Router).

If you are already on FTTC your upload looks odd as I would expect it to be higher with a 25Mb download. You may improve things by checking wiring etc.


Our stats show this currently, it's in line with expectations (download was 25Mbps before resync the other night): https://www.cloudhq.net/c/b92b95e43c2299

Wiring all ok, just wired to master socket, with no extensions. Router plugged straight in to this (I even changed the master socket some time ago to a new version when having some other issues).
Pages in this thread: 1 | 2 | (show all)   Print Thread

Jump to