I've been with Pipex for just over three years. A year ago I was upgraded from 512k to a 2mb (fixed) service. I've been very pleased with it, with actual download speed consistently in the region of 1.7mb.
Just over a week ago, synchronization started to become a little hit and miss. A couple of (different) times a day it would drop off for maybe an hour or two, and then all would be well again. Still, it started to get annoying, so I put a call into Pipex and after all the usual tests, BT visited and proclaimed that I was too far from the exchange to support 2mb. Huh?
I showed the engineer how it was indeed supporting 2mb (at that moment), albeit with an attenuation of 63.0dB and a noise margin of 7.6dB. Borderline perhaps, but I have a screenshot of my router stats from January which shows an attenuation of 63.5dB and a noise margin of 3.9dB. In other words, worse - but I've had no problems then or since.
The engineer told me that *Pipex* might downgrade the speed, or they might put me on ADSL Max. The following day Pipex called and said that *BT* had downgraded my line to 512k. I asked if the downgrade could be to 1mb rather than going all the way down to 512k. Pipex called BT, then called me back and said that BT wouldn't budge.
So, I'm now running at 512k - a quarter of the speed that I had previously enjoyed for months. Pipex would switch me to ADSL Max - if I sign up to another 12-month contract (that's not really a problem, but it's a bit rich in the circumstances to justify it as my being 'upgraded'!).
What I find frustrating is the lack of interest (or ability, if I am to believe Pipex) to give the customer the best service possible. With clear empirical evidence that the line does support 2mb and has done for 11 months, is there any way I can reach someone sensible (in Openreach?) who will let me at least *try* the next best thing (i.e. 1mb)?
Any thoughts, comments and/or pointers would be much appreciated.



Print Thread
couchtomato