General Discussion
  >> General Broadband Chatter


Register (or login) on our website and you will not see this ad.


These posts have been archived and can no longer be replied to or modified.
Pages in this thread: 1 | [2] | (show all)   Print Thread
Standard User Chrysalis
(eat-sleep-adslguide) Mon 28-Sep-09 04:04:34
Print Post

Re: Here is how-to FTTP


[re: deleted] [link to this post]
 
this surprises you?

if they wanted to rollout FTTP, then of course we would see cost estimations plummet as they need to make it look viable. If you dont want to rollout FTTP then the estimations then go up as it is easier to explain why it is not been done.

Even tho the UK has one of the most favourable population densities in the world for such a rollout it will be continued to be used as an excuse.
Standard User deleted
(deleted) Mon 28-Sep-09 08:57:52
Print Post

Re: Here is how-to FTTP


[re: Chrysalis] [link to this post]
 
In reply to a post by Chrysalis:
this surprises you?

if they wanted to rollout FTTP, then of course we would see cost estimations plummet as they need to make it look viable. If you dont want to rollout FTTP then the estimations then go up as it is easier to explain why it is not been done.

Even tho the UK has one of the most favourable population densities in the world for such a rollout it will be continued to be used as an excuse.


Who are 'they'? And why wouldn't 'they' not want to roll out FTTP?
Standard User Chrysalis
(eat-sleep-adslguide) Mon 28-Sep-09 10:55:43
Print Post

Re: Here is how-to FTTP


[re: deleted] [link to this post]
 
they could be anyone.

a reason would be to avoid short term costs.
another reason would be to preserve a leased line market.


Register (or login) on our website and you will not see this ad.

Standard User yarwell
(sensei) Mon 28-Sep-09 12:18:07
Print Post

Re: Here is how-to FTTP


[re: Chrysalis] [link to this post]
 
I'm just waiting for the know-it-alls that can do it for nowt to get on and do it and provide me with a service while making their fortune.

Phil

MaxDSL - goes as fast as it can and doesn't read the line checker first.

MaxDSL diagnostics
Are your kids pirates ? Limewire, Bearshare, Kazaa, BitTorrent, eMule are all tools of the trade.
Standard User Andrue
(knowledge is power) Mon 28-Sep-09 14:11:24
Print Post

Re: Here is how-to FTTP


[re: yarwell] [link to this post]
 
In reply to a post by yarwell:
I'm just waiting for the know-it-alls that can do it for nowt to get on and do it and provide me with a service while making their fortune.
Mention the use of copper in the local loop and he'll soon be along laugh

Andrue Cope
Brackley, UK

Just because he can smile
Standard User yarwell
(sensei) Mon 28-Sep-09 14:14:57
Print Post

Re: Here is how-to FTTP


[re: Andrue] [link to this post]
 
he might be a she, and by saying that I'm using 1 Gbit/s over copper wire and it's baseband I can interfere with her head.

Phil

MaxDSL - goes as fast as it can and doesn't read the line checker first.

MaxDSL diagnostics
Are your kids pirates ? Limewire, Bearshare, Kazaa, BitTorrent, eMule are all tools of the trade.
Standard User deleted
(deleted) Mon 28-Sep-09 14:22:16
Print Post

Re: Here is how-to FTTP


[re: yarwell] [link to this post]
 
In reply to a post by yarwell:
he might be a she, and by saying that I'm using 1 Gbit/s over copper wire and it's baseband I can interfere with her head.


GigE over copper isn't baseband as far as I know? It uses pulse amplitude modulation, doesn't that exclude it from being baseband as each Hz carries multiple bits?

Edited by deleted (Mon 28-Sep-09 14:23:11)

Standard User yarwell
(sensei) Mon 28-Sep-09 15:45:17
Print Post

Re: Here is how-to FTTP


[re: deleted] [link to this post]
 
GigE over copper isn't baseband as far as I know

I believe it is, as it is called 1000Base-T where Base has the obvious meaning. Compared to the baseband 100M ethernet (100Base-T) it uses an additional set of twisted pairs with 4D-PAM5 encoding, apparently

It is the use of simple voltage levels on the wires rather than complex multifrequency parallel paths that makes it baseband. In essence it's very fast morse code !

Phil

MaxDSL - goes as fast as it can and doesn't read the line checker first.

MaxDSL diagnostics
Are your kids pirates ? Limewire, Bearshare, Kazaa, BitTorrent, eMule are all tools of the trade.
Standard User deleted
(deleted) Mon 28-Sep-09 15:51:39
Print Post

Re: Here is how-to FTTP


[re: yarwell] [link to this post]
 
In reply to a post by yarwell:
I believe it is, as it is called 1000Base-T where Base has the obvious meaning. Compared to the baseband 100M ethernet (100Base-T) it uses an additional set of twisted pairs with 4D-PAM5 encoding, apparently

It is the use of simple voltage levels on the wires rather than complex multifrequency parallel paths that makes it baseband. In essence it's very fast morse code !


Ahh now I get it.

Cheers, that's my bit of knowledge for today. I had in my mind that it used higher order modulation from somewhere.

10GbE apparently uses 16PAM, I guess that would still be considered baseband?

Edited by deleted (Mon 28-Sep-09 15:59:06)

Standard User yarwell
(sensei) Mon 28-Sep-09 18:23:59
Print Post

Re: Here is how-to FTTP


[re: deleted] [link to this post]
 
10GbE apparently uses 16PAM, I guess that would still be considered baseband?

the encoding doesn't define whether it's baseband or broadband, that's down to the method of signalling. Broadband means using a wide spectrum and signalling in multiple frequency bands within that spectrum at once - the multiplicity of cable TV channels and high speed internet on the same coax for example.

Baseband using on/off or discrete levels of voltage to do the signalling, with ever more elaborate line coding to cram more data down the line at the same or similar clock speed.

Phil

MaxDSL - goes as fast as it can and doesn't read the line checker first.

MaxDSL diagnostics
Are your kids pirates ? Limewire, Bearshare, Kazaa, BitTorrent, eMule are all tools of the trade.
Pages in this thread: 1 | [2] | (show all)   Print Thread

Jump to