I see at some point you have disconnected/reconnected. 2.5 days ago? Any particular reason, and have you done several?

If it is an 834Gv4 then instructions, to get the full stats, either use DMT or make sure telnet is enabled if you are on Vista or Win 7, then:-

Netgear instructions are:-

(Before you can telnet into a Netgear router you need to enter the following in your browser URL bar:-

http://192.168.0.1/setup.cgi?todo=debug

That opens a window empty except for �Debug Enabled�. You can close that window immediately).

telnet 192.168.0.1
adslctl info --stats

There is also the possibility with those stats that an snr reset will take you up to a 4000kbps IP Profile.

Has there been a history of instability?

In reply to a post by RobertoS:

I see at some point you have disconnected/reconnected. 2.5 days ago? Any particular reason, and have you done several?

oh yes i forgot i disconnected Sunday night (8.47 pm)for about 3 mins to see if that would push the ip profile up, but did not but gave a sync increase

i have no instability on my line been at 3.5 profile and just over 4000 sync for the last 4 yrs are so.

i have v3 of the router

many thanks

For v3

http://192.168.0.1/setup.cgi?todo=debug

From a command prompt

telnet 192.168.0.1

then

cat /proc/avalanche/avsar_modem_stats

exit

hi there

i copied "http://192.168.0.1/setup.cgi?todo=debug" into my browser address bar, entered the admin and password, then got a page saying debug enable!

opened cmd typed "telnet 192.168.0.1" and got the following

C:\Users\Home User>telnet 192.168.0.1
'telnet' is not recognized as an internal or external command
operable program or batch file.

i must be doing something wrong , many thanks

Windows?

I think telnet is an optional program you need to add/install from the control panel (at least that's my memory). Alternatively I'm sure there are free telnet client programs available on the www.

Try putty http://www.chiark.greenend.org.uk/~sgtatham/putty/ if you can't enable the Windows version.

many thanks , stats below , do they look ok ? . many thanks


AR7 DSL Modem Statistics:
--------------------------------
[DSL Modem Stats]
US Connection Rate: 448 DS Connection Rate: 4416
DS Line Attenuation: 39 DS Margin: 6
US Line Attenuation: 21 US Margin: 23
US Payload : 727775232 DS Payload: 408626
00
US Superframe Cnt : 13277752 DS Superframe Cnt: 132777
US Transmit Power : 0 DS Transmit Power: 0
LOS errors: 0 SEF errors: 0
Errored Seconds: 0 Severely Err Secs: 0
Frame mode: 3 Max Frame mode: 0
Trained Path: 1 US Peak Cell Rate: 1056
Trained Mode: 3 Selected Mode: 1
ATUC Vendor Code: 54535443 ATUC Revision: 2
Hybrid Selected: 3 Trellis: 1
Showtime Count: 1 DS Max Attainable Bit Rate: 4416 kbps
BitSwap: 1 US Max Attainable Bit Rate: n/a
Annex: AnxA psd_mask_qualifier: 0x0000
Power Management Status: L0 DS HLINSC: 0
US ACTPSD: -345 DS ACTPSD: -355
Total init. errors: 0 Total init. timeouts: 0
Showtime init. errors: 0 Showtime init. timeouts: 0
Last showtime init. errors: 0 Last showtime init. timeouts: 0
ATUC ghsVid: b5 00 54 53 54 43 00 00
T1413Vid: 00 00 T1413Rev: 00 VendorRev: 00
ATUR ghsVid: b5 00 54 53 54 43 00 00
T1413Vid: 00 00 T1413Rev: 00 VendorRev: 00

[Upstream (TX) Interleave path]
CRC: 19 FEC: 272 NCD: 0
LCD: 0 HEC: 680

[Downstream (RX) Interleave path]
CRC: 653 FEC: 811443 NCD: 0
LCD: 0 HEC: 0

[Upstream (TX) Fast path]
CRC: 0 FEC: 0 NCD: 1
LCD: 0 HEC: 0

[Downstream (RX) Fast path]
CRC: 0 FEC: 0 NCD: 0
LCD: 0 HEC: 0

[ATM Stats]
[Upstream/TX]
Good Cell Cnt: 15161984
Idle Cell Cnt: 223336504

Tx Packets Dropped Count: 0
Tx Bad Packets Count: 0

[Downstream/RX)]
Good Cell Cnt: 353566056
Idle Cell Cnt: 1997343843
Bad Hec Cell Cnt: 3683
Overflow Dropped Cell Cnt: 0
Rx Packets Dropped Count: 0
Rx Bad Packets Count: 0


[SAR AAL5 Stats]
Tx PDU's: 6825242
Rx PDU's: 12503204
Tx Total Bytes: 401551913
Rx Total Bytes: 3791118701
Tx Total Error Counts: 0
Rx Total Error Counts: 188


[OAM Stats]
Near End F5 Loop Back Count: 0
Near End F4 Loop Back Count: 0
Far End F5 Loop Back Count: 0
Far End F4 Loop Back Count: 0
SAR OAM Ping Response Drop Count=0
#
#

They look fine to me as long as your router has been up for several days (if it was several minutes I'd be concerned about the error counts).

One last question. Have you tried getting the stats from the test socket within modernish BT master sockets? You'd normally expect to sync a little bit higher with a 39dB attenuation.

hi there i only have the one socket an i am permanently plugged into the test socket , so the above stats are from the test socket many thanks