When I put in the postcode KY16 9LB I get a list of different addresses, most of which are fed by cabinet 15.
This one for example:
Address COSMOS COMMUNITY CENTRE, ABBEY WALK, ST ANDREWS, KY16 9LB on Exchange ST ANDREWS is served by Cabinet 15
Shows:
High Low High Low
FTTC Range A (Clean) 80 60.8 20 20 -- Available
FTTC Range B (Impacted) 74.8 48.4 20 12.2 -- Available
WBC ADSL 2+ Up to 13 -- 7.5 to 17.5 Available
WBC ADSL 2+ Annex M Up to 13 Up to 1 7.5 to 17.5 Available
ADSL Max Up to 6.5 -- 5.5 to 8 Available
WBC Fixed Rate 2 -- -- Available
Fixed Rate 2 -- -- Available
This one:
Address ST ANDREWS NURSERY, ABBEY WALK, ST ANDREWS, KY16 9LB on Exchange ST ANDREWS is served by Cabinet 15
Shows:
WBC ADSL 2+ Up to 7 -- -- Available
WBC ADSL 2+ Annex M Up to 7 Up to 0.5 -- Available
ADSL Max Up to 5.5 -- -- Available
WBC Fixed Rate 2 -- -- Available
Fixed Rate 2 -- -- Available
Other Offerings
Fibre Multicast -- -- -- 31-May-15
Copper Multicast -- -- -- Available
They're fed by the same cabinet and Abbey Walk isn't a long road, so how can one show as FTTC available and one not?
Cheers
Lee



Pages in this thread:
Print Thread
vit0