In reply to a post by michaelh:

In reply to a post by Banger:

My cabinet is in the design phase according to or where and when site. How does infinity 2 performed from those that have it and can you get it separate from the phone line as I have already paid my line rental in advance with BTs line rental 12 month saver?

I have Infinity 2. The Line Checker told me when I ordered (and still does) that I would get 76 Meg download speed, but I have never achieved better than 60 - even using the Test Socket.

I very much doubt that. The checker will have given two ranges and said that you would probably lie within those. What are the actual figures quoted for both ranges?

Depends which checker of course. The BTW one of course doesn't give throughput estimates. Plus the poster could be using wireless.

In reply to a post by Banger:

can you get it separate from the phone line as I have already paid my line rental in advance with BTs line rental 12 month saver?

Yes, the line rental saver and Infinity can exist on the same line and have different contract end dates..

Performance will depend how far from the cabinet you are - specifically the route the line takes. It will also depend on takeup, as crosstalk from other subscribers can reduce your speeds. If you are an early adopter, you should expect speed drops over time.

Up to 200m, you should be easily able to get 80/20.
Up to 400m, you will be grazing the top of the 80/20speeds, but crosstalk might take it down.
At 600m, you might see around 50Mbps
Speeds will then have dropped to around 25Mbps around 1000-1200m.

These are rough speeds, but performance can vary hugely with crosstalk and the specific details of your line.

Thanks for that. I am 700m from the exchange with a cabinet roughly half way in between as the crow flies so I am thinking in the 60s. I currently get 18.3 on ADSL2+.

In reply to a post by Banger:

Thanks for that. I am 700m from the exchange with a cabinet roughly half way in between as the crow flies so I am thinking in the 60s. I currently get 18.3 on ADSL2+.

If it doesn't yet http://dslchecker.bt.com/ will eventually [as long as you don't have an LLU line (i.e. Sky/Tal]talk) give an estimate of the speeds you can expect to achieve.

There is also an address checker that works regardless of who your line rental is with but will be less accurate than using a phone number.

I used to get 9M using adsl2+ and converted to FTTC with the cabinet about 350m away. I can get >100M but just buy a 40M service. I think you will get up to 80M without any problem, if you pay for it.

As other have said, try the http://www.dslchecker.bt.com/ checker and see what the stats think you will get for your line.

DSL checker doesnt yet show FTTC speeds.

always has for me, normally at the top of the list....

In reply to a post by Banger:

DSL checker doesnt yet show FTTC speeds.

Your cabinet is being funded by BDUK. These tend not to show estimated speeds on the dsl checker until they are nearly live.

As your cabinet has just entered the design phase I'm afraid you are probably looking at maybe 12 months before FTTC is available.

Edited by gt94sss2 (Fri 12-Feb-16 12:52:31)