Unexpected results:
Speed per fast.com via:
LAN connection: 92 Mbps
Wifi: 100/110
It could just be one unconnected pin. It may be as simple as re-plugging into the coupler, or it may be necessary to repunch one of the RJ45 connectors.
Explanation: CAT5 cable has four copper pairs. For a 1G connection, all four pairs are used concurrently (send and receive, in both directions)
But in the older 100M and 10M ethernet standards, only two pairs were used: one for transmit, one for receive. Hence you can get situations where if you have a bad connection, which breaks one of the connections, it will work at 100M but not at 1G. You can also get this if you use an old "crossover" cable instead of straight-through.
Best tool for diagnosing this is an CAT5 tester:
https://www.amazon.co.uk/gp/product/B004BVIIAS/
That's the one I bought, and will set you back the princely sum of £2.74 if you can wait for it to arrive from China. You'll probably pay more for the battery
It separates into two halves, one for each end of the cable, and you watch the LEDs to check for broken or crossed wires.