General Discussion
  >> General Broadband Chatter


Register (or login) on our website and you will not see this ad.


Pages in this thread: 1 | 2 | [3] | (show all)   Print Thread
Standard User john7
(member) Thu 11-Jun-20 16:33:12
Print Post

Re: Is there a problem with my regraded to 80/20?


[re: MHC] [link to this post]
 
In reply to a post by MHC:
So, at a guess 300 metres maximum? If so, that would tie in with the attenuation but not necessarily explain the slow speed.

Have you tried disconnecting EVERYTHING extension cabling, filter, phones and having just the modem/hub connected?

edit to add:

I missed the 65 Max, but that is still low for the attenuation.


I have replaced the filter which slightly lowered the latency. I haven't tried removing the phone; we are tied up organising a U3A AGM (Zoom) so to do that for a lengthy time wouldn't go down well!

My ISP is now getting BT to adjust the exchange settings as even they admit it should have better speed than its getting. So I will see if that does help. If it does I would be interested in who set the setting put on the line originally.
Administrator MrSaffron
(staff) Thu 11-Jun-20 16:45:55
Print Post

Re: Is there a problem with my regraded to 80/20?


[re: john7] [link to this post]
 
Nothing to do with BT or the exchange.

DSLAM is owned by Openreach and only three profiles available plus a reset of DLM in terms of tweaks.

The author of the above post is a thinkbroadband staff member. It may not constitute an official statement on behalf of thinkbroadband.
Standard User MHC
(sensei) Thu 11-Jun-20 16:45:57
Print Post

Re: Is there a problem with my regraded to 80/20?


[re: john7] [link to this post]
 
Try it late at night or early morning when you are unlikely to need the phone. All it needs is a disconnect, remove everything, reconnect and use for say 30 minutes, before reversing everything. If you can prove everything in te house is OK, you can press for external checks.

Not sure what they can do at teh exchange though - FTTC terminates in the cabinet and is shared fibre from there back.


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

M H C


taurus excreta cerebrum vincit


Register (or login) on our website and you will not see this ad.

Standard User john7
(member) Thu 11-Jun-20 16:48:44
Print Post

Re: Is there a problem with my regraded to 80/20?


[re: Andrue] [link to this post]
 
I also have experience of line problems. Before we moved where we lived had a fairly lengthy and mostly old main BT cabling through the village. We spent 6-8 years battling BT, phone noise was so bad at times calls would be discounted and/or inaudible. It was the classic dry joint problem, as the cabling got wet or dried out it got worse or improved. With fibre things got much improved except the phone line that still had to go through the old cabling. In the end an engineer switched our phone line to one vacated by someone moving the same morning, there were no spare lines to change to. I know they weren’t meant to do that and some other poor sod got our old line, but… The fibre was no problem the cabinet was at the end of our garden with a new cable to a pole at i
Standard User john7
(member) Fri 12-Jun-20 11:01:14
Print Post

Re: Is there a problem with my regraded to 80/20?


[re: MrSaffron] [link to this post]
 
Indeed engineer turned up at house! He replaced the socket and some wiring. Though speed will go up to middle 50’s.
Pages in this thread: 1 | 2 | [3] | (show all)   Print Thread

Jump to