BT FTTP premises??

My move from Plusnet FTTC to BT FTTP was carried out yesterday afternoon.
Good communications from the ISP. Engineer arrived at 1.30pm as expected.
A second unused twisted pair was disconnect at my request. The new fibre line was fed into the upstairs study. The fibre cable carried a twisted pair line. Job was completed at 5.30pm

Overall I am happy with the product and the installation. It took about an hour longer than expected as a Huawei ONT was mistakenly fitted. After a long call to his base later, it was replaced with a smaller Nokia ONT and I was connected.

Speed tester shows 493 Mb (Opted for BT Full Fibre 500 package) download speed which is quite a jump from the 24 Mb I was getting with Plusnet.

The only "slight" niggle is that the BT Smart hub has one fewer Ethernet sockets than the older Plusnet one it replaced.

Looks familiar

Looked like a copy/paste but could not recall post, so thank you.

Post still there so context for your post remains, but poster dealt with.

This was my post. Why did the user copy it?

In reply to a post by spile:

This was my post. Why did the user copy it?

In most of these cases its to legitimise themselves before they start spamming.