You are connected to cabinet 2. Your line length (from the exchange) is approximately 1555 meters.

"Superfast" VDSL (Fibre to the cabinet) up to 68Mb/s

From the A&A checker which is what TTB said on signup give or take a few mb/s.

TTB Order status dashboard now says "order processing", not long now.

12.30AM and Uno disconnects so I change user name to autoconfig and we are connected. Yay.

At what sync speed, Tim?

Stats recorded 23 Nov 2020 00:43:18

DSLAM type / SW version: BDCM:0xa4a1 (164.161) / v0xa4a1
Modem/router firmware: AnnexA version - A2pv6F039v.d26a
DSL mode: VDSL2 Profile 17a
Status: Showtime
Uptime: 0 hour 15 min 32 sec
Resyncs: 4 (since 19 Nov 2020 20:10:15)

Downstream Upstream
Line attenuation (dB): 19.6 0.0
Signal attenuation (dB): Not monitored
Connection speed (kbps): 54706 11767
SNR margin (dB): 6.2 6.3
Power (dBm): 12.7 7.6
Interleave depth: 8 1
INP: 48.00 0
G.INP: Enabled Not enabled
Vectoring status: 5 (VECT_UNCONFIGURED)

RSCorr/RS (%): 0.0001 0.0000
RSUnCorr/RS (%): 0.0000 0.0000
ES/hour: 15.0 0

Seems my banding has been reset.

Tracing route to bbc.co.uk [151.101.128.81]
over a maximum of 30 hops:

1 <1 ms <1 ms <1 ms ttrouter [192.168.1.1]
2 8 ms 8 ms 8 ms ae49-ner001.irl.as13285.net [78.144.1.41]
3 9 ms 8 ms 8 ms ae48-scr001.msp.as13285.net [78.144.1.36]
4 * * * Request timed out.
5 8 ms 8 ms 8 ms 151.101.128.81

8ms to Gateway that is amazing and only 5 hops to BBC.

Browsing is snappy and TR-069 hasn't changed my Cloudfare Manual DNS on the TT Router.

Edited by Banger (Mon 23-Nov-20 01:32:58)

I have been playing with the TT router which is downstairs and my AC-68U which is upstairs and most devices apart from my downstairs Amazon Speaker seem to prefer the AC-68U to connect to. Even my PC downstairs which is one room away from the TT router prefers the AC-68U. They both have the same SSID and password.

@john

https://www.speedtest.net/my-result/d/81cf459b-1a05-...

Looking through my old speedtest results here's one for 73/19. Those were the days, from 04.03.18.

In reply to a post by Banger:

Stats recorded 23 Nov 2020 00:43:18

Downstream Upstream
Line attenuation (dB): 19.6 0.0
Signal attenuation (dB): Not monitored
Connection speed (kbps): 54706 11767
SNR margin (dB): 6.2 6.3
Power (dBm): 12.7 7.6
Interleave depth: 8 1
INP: 48.00 0
G.INP: Enabled Not enabled
Vectoring status: 5 (VECT_UNCONFIGURED)

RSCorr/RS (%): 0.0001 0.0000
RSUnCorr/RS (%): 0.0000 0.0000
ES/hour: 15.0 0

Interleave depth changed to 8 1 and also the INP value after the resync - what are the SNR margins and error seconds (ES) looking like now after several hours of uptime?

Stats recorded 23 Nov 2020 18:33:18

DSLAM type / SW version: BDCM:0xa4a1 (164.161) / v0xa4a1
Modem/router firmware: AnnexA version - A2pv6F039v.d26a
DSL mode: VDSL2 Profile 17a
Status: Showtime
Uptime: 2 hours 34 min 50 sec
Resyncs: 6 (since 19 Nov 2020 20:10:15)

Downstream Upstream
Line attenuation (dB): 19.6 0.0
Signal attenuation (dB): Not monitored
Connection speed (kbps): 55009 11775
SNR margin (dB): 6.3 6.4
Power (dBm): 12.6 7.4
Interleave depth: 8 1
INP: 48.00 0
G.INP: Enabled Not enabled
Vectoring status: 5 (VECT_UNCONFIGURED)

RSCorr/RS (%): 0.0001 0.0010
RSUnCorr/RS (%): 0.0000 0.0000
ES/hour: 1.84 1.06

Engineer turned up about 4pm and I asked him to test the line which he did from the BT66 outside but no problems found. He did say the cable from the BT66 to the Master Socket about a metre needs replacing as it is the old drop wire originally replaced with twisted pair. But that will happen in non Covid times.

Probably a good idea to leave the VDSL2 connection alone for a while - I guess the phone is working OK?