General Discussion
  >> General Broadband Chatter


Register (or login) on our website and you will not see this ad.


Pages in this thread: 1 | 2 | [3] | 4 | 5 | (show all)   Print Thread
Standard User Pheasant
(eat-sleep-adslguide) Wed 11-Nov-26 22:43:16
Print Post

Re: Error in openreach database, how to get fixed?


[re: parklife] [link to this post]
 
So you cancelled the FTTP install or they cancelled? Who was / is the ISP?
Standard User PCJM40
(fountain of knowledge) Wed 11-Nov-26 22:56:24
Print Post

Re: Error in openreach database, how to get fixed?


[re: parklife] [link to this post]
 
Simple question why do you believe its a database issue? you say the pole 90m has FTTP equipment on it and the pole outside your house doesn't.
Standard User parklife
(newbie) Wed 11-Nov-26 23:03:20
Print Post

Re: Error in openreach database, how to get fixed?


[re: PCJM40] [link to this post]
 
It is possible to see both Openreach and HyperOptic fibre equipment on other poles in the street, but only Hyperoptic on the nearest pole.
For 6 of the 8 houses in my terrace, of which mine is in the middle, the checker says FTTP is not available. But for mine it says it is but with "possible line of sight issues". It's bizarre.

Edited by parklife (Wed 11-Nov-26 23:07:38)


Register (or login) on our website and you will not see this ad.

Standard User parklife
(newbie) Wed 11-Nov-26 23:06:19
Print Post

Re: Error in openreach database, how to get fixed?


[re: Pheasant] [link to this post]
 
my current (and longstanding) ISP is Vodafone. The failed switch which I cancelled was with Zen.
Standard User PCJM40
(fountain of knowledge) Wed 11-Nov-26 23:10:00
Print Post

Re: Error in openreach database, how to get fixed?


[re: parklife] [link to this post]
 
In reply to a post by parklife:
It is possible to see both Openreach and HyperOptic fibre equipment on other poles in the street, but only Hyperoptic on the nearest pole.
For 6 of the 8 houses in my terrace, of which mine is in the middle, the checker says FTTP is not available. But for mine it says it is but with "possible line of sight issues"
Have you mapped out the other Openreach poles between the line of sight pole and your property? could the FTTP be delivered via multiple drops across them? If its under 350m then they could consider doing that.
Standard User Pheasant
(eat-sleep-adslguide) Wed 11-Nov-26 23:17:00
Print Post

Re: Error in openreach database, how to get fixed?


[re: parklife] [link to this post]
 
I think with the benefit of hindsight, cancelling the switch may not have worked in your best interest insofar as getting a working FTTP connection.

When the connection is not straightforward, best to find an ISP that’s more likely to chase Openreach to resolve. Someone like A&A or Aquiss. Openreach usually do get there eventually, but patience is required and it may take some time. A few months is not unheard of where infrastructure needs to be upgraded or replaced.

Perhaps install this as a new connection and cancel the copper connection after the fact.
Standard User parklife
(newbie) Wed 11-Nov-26 23:19:44
Print Post

Re: Error in openreach database, how to get fixed?


[re: PCJM40] [link to this post]
 
In reply to a post by PCJM40:
In reply to a post by parklife:
It is possible to see both Openreach and HyperOptic fibre equipment on other poles in the street, but only Hyperoptic on the nearest pole.
For 6 of the 8 houses in my terrace, of which mine is in the middle, the checker says FTTP is not available. But for mine it says it is but with "possible line of sight issues"
Have you mapped out the other Openreach poles between the line of sight pole and your property? could the FTTP be delivered via multiple drops across them? If its under 350m then they could consider doing that.

Thanks. interesting idea. There's no line of sight from the pole opposite to any other, so that sort of approach would need to go via an attachment to neighbour's house (or houses). But as I'm happy with the low latency FTTC connection I have, correcting the database would I hope suffice to allow me to switch to FTTC with another ISP.
Standard User burble
(experienced) Wed 11-Nov-26 23:28:06
Print Post

Re: Error in openreach database, how to get fixed?


[re: parklife] [link to this post]
 
In reply to a post by parklife:
In reply to a post by PCJM40:
In reply to a post by parklife:
It is possible to see both Openreach and HyperOptic fibre equipment on other poles in the street, but only Hyperoptic on the nearest pole.
For 6 of the 8 houses in my terrace, of which mine is in the middle, the checker says FTTP is not available. But for mine it says it is but with "possible line of sight issues"
Have you mapped out the other Openreach poles between the line of sight pole and your property? could the FTTP be delivered via multiple drops across them? If its under 350m then they could consider doing that.

Thanks. interesting idea. There's no line of sight from the pole opposite to any other, so that sort of approach would need to go via an attachment to neighbour's house (or houses). But as I'm happy with the low latency FTTC connection I have, correcting the database would I hope suffice to allow me to switch to FTTC with another ISP.


How does the present copper get to the pole?
At one of our houses the fibre has to go via several poles from the one which has the CBT.

Edited by burble (Wed 11-Nov-26 23:30:12)

Standard User parklife
(newbie) Thu 12-Nov-26 08:27:53
Print Post

Re: Error in openreach database, how to get fixed?


[re: Pheasant] [link to this post]
 
Thank you for the suggestions.
It turns out that Aquiss will offer me a SOGEA connection over copper 🙂 - unlike all the other ISPs I have tried, so I will reach out to them as my next step.
Standard User parklife
(newbie) Thu 12-Nov-26 08:32:42
Print Post

Re: Error in openreach database, how to get fixed?


[re: burble] [link to this post]
 
thanks for the reply.
the copper connection appears to come out of the ground.
as per other strand of this chat, I followed up the suggestion of looking at Aquiss ISP and unlike other ISPs it appears that they will offer me a SOGEA over copper so I will reach out to them.
thanks also to @PCJM40 for the suggestions. Hopefully trying Aquiss gives me a solution!
Pages in this thread: 1 | 2 | [3] | 4 | 5 | (show all)   Print Thread

Jump to