Technical Discussion
  >> Hardware Issues


Register (or login) on our website and you will not see this ad.


Pages in this thread: 1 | 2 | [3] | (show all)   Print Thread
Standard User deleted
(deleted) Sat 20-May-23 16:29:44
Print Post

Re: Hardware for Pfsense


[re: smouty] [link to this post]
 
In reply to a post by smouty:
I just bought a N100 Topton with i226 which is twice the speed and less power so will see how that one fares.
Sounds good, let us know how you get on with it compared to the J4125
Standard User smouty
(committed) Sat 20-May-23 20:24:18
Print Post

Re: Hardware for Pfsense


[re: deleted] [link to this post]
 
It is fast. About twice the speed for around the same power or less.

I also have two NVME rather than SATA in the J4125.

https://imgur.com/a/UhtLZWq

Proxmox installed with a minor issue with the frame buffer as it is pretty new but found a workaround.

OPNSense on Topton J4125 - SWISH Fibre 900
PiHole/AdGuard home - Unifi for Wifi

Edited by smouty (Sat 20-May-23 20:25:51)

Standard User Michael_Chare
(knowledge is power) Wed 21-Jun-23 21:53:51
Print Post

Re: Hardware for Pfsense


[re: deleted] [link to this post]
 
I now have two Qotoms running OPNsense and linked by a WireGuard VPN. One is connected to Gigaclear using DHCP which was easy to get to work. The other is connected to Plusnet FTTC via an HG612 using PPPoE which was more tricky to get to work. I can provide a link on how to configure the PPPoE should you need it.

Michael Chare


Register (or login) on our website and you will not see this ad.

Pages in this thread: 1 | 2 | [3] | (show all)   Print Thread

Jump to