Sorry. I'm stumped. You could try a cross-post in The Park and see if any of the nerds there know the answer, otherwise it's the ZyXel forums, I'm afraid. Either that or a very close perusal of the user guide.

If you post in another (TBB) forum, please be sure to indicate that it is a cross-post and provide a link to this thread.

I've had a look around the settings but, I can't seem to find anything that may stop the other devices from logging in


And will post on another forum, see if they can help

Thanks for the help guys, much appreciated.

Edited by deleted (Wed 11-Mar-15 20:38:43)

Ah� found a copy of the manual, here.

On page 22 there's a bit about limiting access:

2. Limit who can access to your AMG1302-T10B/AMG1202-T10B�s Web Configurator or CLI. You can enter the IP address of the secured LAN host in Web Configurator, Advanced Setup, Maintenance -> RemoteMGNT to allow special access to your AMG1302-T10B
.
.
.
The default value in this field is 0.0.0.0, which means you do not care which host is trying to telnet your AMG1302-T10B/AMG1202-T10B or access the Web Configurator of.

Might be worth a check.

Is this a new or used item that you're playing with? If it's used, I would strongly recommend re-flashing the firmware.

It's all brand new, got it the other day.