User comments on ISPs
  >> Other Providers (without dedicated forums)


Register (or login) on our website and you will not see this ad.


Pages in this thread: 1 | 2 | 3 | [4] | 5 | 6 | 7 | 8 | (show all)   Print Thread
Standard User deleted
(deleted) Sun 30-Nov-14 12:32:49
Print Post

Re: coms down?


[re: bobble_bob] [link to this post]
 
Lets hope it stays broken if thats the case. I noticed my snr has been changed from 12 to 3 in my router.
Standard User bobble_bob
(fountain of knowledge) Sun 30-Nov-14 12:58:00
Print Post

Re: coms down?


[re: deleted] [link to this post]
 
Mines stayed on 9db. Were on removed from the Traffic Management system by PaulComs at the time?
Standard User bobble_bob
(fountain of knowledge) Mon 01-Dec-14 06:35:49
Print Post

Re: coms down?


[re: bobble_bob] [link to this post]
 
Anyone else gwt a disconnection just after midnight? Only a few mins long


Register (or login) on our website and you will not see this ad.

Standard User deleted
(deleted) Mon 01-Dec-14 14:50:03
Print Post

Re: coms down?


[re: bobble_bob] [link to this post]
 
I seem to have had one at 12:07 am.
Standard User Gari
(fountain of knowledge) Mon 01-Dec-14 21:05:19
Print Post

Re: coms down?


[re: deleted] [link to this post]
 
In reply to a post by KOR_71:
I seem to have had one at 12:07 am.


Went down at 12:04 and a few retries later it was back up at 12:07

Seems to be the same problem as the disconnections at the weekend, namely CHAP authentication failed

I don't think it's possible to get to anyone at Coms who would understand if you called them so just wait and see I guess.

---


Dec 01 00:04:44 daemon pppd[13512]: Connection terminated.
Dec 01 00:04:48 daemon pppd[14149]: PPP: Start to connect ...
Dec 01 00:05:38 daemon pppd[14149]: CHAP authentication failed
Dec 01 00:05:38 daemon pppd[14149]: User name and password authentication failed.
Dec 01 00:05:38 daemon pppd[14149]: Connection terminated.
Dec 01 00:05:41 daemon pppd[14149]: PPP: Start to connect ...
Dec 01 00:05:50 daemon pppd[14149]: LCP: timeout sending Config-Requests
Dec 01 00:05:50 daemon pppd[14149]: Connection terminated.
Dec 01 00:05:53 daemon pppd[14149]: PPP: Start to connect ...
Dec 01 00:06:02 daemon pppd[14149]: LCP: timeout sending Config-Requests
Dec 01 00:06:02 daemon pppd[14149]: Connection terminated.
Dec 01 00:06:05 daemon pppd[14149]: PPP: Start to connect ...
Dec 01 00:06:51 daemon pppd[14149]: Remote message: CHAP authentication failure, unit 19883
Dec 01 00:06:51 daemon pppd[14149]: CHAP authentication failed
Dec 01 00:06:51 daemon pppd[14149]: User name and password authentication failed.
Dec 01 00:06:51 daemon pppd[14149]: Connection terminated.
Dec 01 00:06:54 daemon pppd[14149]: PPP: Start to connect ...
Dec 01 00:07:03 daemon pppd[14149]: Connection terminated.
Dec 01 00:07:06 daemon pppd[14149]: PPP: Start to connect ...
Dec 01 00:07:09 daemon pppd[14149]: Received valid IP address from server. Connection UP.
Standard User bobble_bob
(fountain of knowledge) Wed 03-Dec-14 18:15:54
Print Post

Re: coms down?


[re: Gari] [link to this post]
 
Anyone's connection running abit slow over http? Xbox speed tests are fine, just http is slow
Standard User deleted
(deleted) Wed 03-Dec-14 18:44:35
Print Post

Re: coms down?


[re: bobble_bob] [link to this post]
 
Same here, http is much slower than usual.
Standard User bobble_bob
(fountain of knowledge) Wed 03-Dec-14 18:52:00
Print Post

Re: coms down?


[re: deleted] [link to this post]
 
Yours intermittent? Seems fine one min, they half speeds the next. Usenet (before TM kicked in at 6pm) was fine, so was gaming and streaming like i said.
Standard User deleted
(deleted) Wed 03-Dec-14 19:07:19
Print Post

Re: coms down?


[re: bobble_bob] [link to this post]
 
Yeah my speeds are up and down, no consistent speed over http port 80, everything else seems normal.
Standard User bobble_bob
(fountain of knowledge) Wed 03-Dec-14 19:14:29
Print Post

Re: coms down?


[re: deleted] [link to this post]
 
Seems to be ok now, has been for abit

Not sure how you can get poor speeds over 1 port and rest fine, but i dont know enough about it
Pages in this thread: 1 | 2 | 3 | [4] | 5 | 6 | 7 | 8 | (show all)   Print Thread

Jump to