Gigaclear IPv6 router config

Morning,

I believe GC have rolled out IPv6 to all customers now and I wanted to set my router up to be able to utilise it. Poking around, I found the following config for TP-Link routers (I have a BE3600) but, it doesn't seem to be picking up an IPv6 IP address from GC. Has anyone else had success?

IPv6 Internet:
Enable IPv6
Internet Connection Type = Dynamic IP (SLAAC/ DHCPv6)
Get IPv6 Address = Non-Address
Prefix Delegation = Enabled
DNS addresses = Auto (I have mine set manually)

LAN:
Assigned Type = SLAAC/ RDNSS
Address Prefix /64 (field disabled so can't change)

Paul

Done a little more digging on this and it appears the config is correct. Which would suggest I don't have IPv6 available on my connection.
Worth noting that my connection isn't provisioned through CGNAT, despite not paying for a static IP address. So I'd not see a real benefit even if I did have IPv6 available.

I guess that could be the reason why I don't have IPv6 available too...

Paul

I asked Gigaclear support how to configure this, and they told me DHCPv6 with a PD of /48. With those settings IPv6 works fine for me (Unifi router).