User comments on ISPs
  >> PlusNet plc


Register (or login) on our website and you will not see this ad.


These posts have been archived and can no longer be replied to or modified.
  Print Thread
Standard User tom530
(regular) Thu 02-Oct-08 07:43:13
Print Post

iplates free from some ISPS


[link to this post]
 
From reading this article regarding iplates it states some ISP may give these out free of charge in the future to customers .
I am probably moving to Plusnet in the next 7 days have Plusnet got any plans to introduce this in the near future .
I have enclosed the link below and would be interested in any comments
Thanks




http://www.pcpro.co.uk/news/227712/isps-to-give-away-broadbandboosting-iplates.html
Standard User deleted
(deleted) Thu 02-Oct-08 11:10:33
Print Post

Re: iplates free from some ISPS


[re: tom530] [link to this post]
 
Hi there,

We've run a few closed trials where we've dispatched iPlates to customers but I'm not 100% sure what are future plans are in this area TBH, I shall try and find out.

Last I heard though the iPlates are dependent on you using eCat for your hardware ordering (which we're not doing at the moment).

Kind Rgds,
Standard User Smithy99
(experienced) Thu 02-Oct-08 16:44:12
Print Post

Re: iplates free from some ISPS


[re: deleted] [link to this post]
 
The i-plate is a waste of money, you would be much better getting a filtered faceplate.

To achieve the same result as fitting the i-plate you can just remove the wire to terminal 3 (the ring wire) this is effectively what the i-plate does.


Register (or login) on our website and you will not see this ad.

Standard User deleted
(deleted) Thu 02-Oct-08 17:10:17
Print Post

Re: iplates free from some ISPS


[re: Smithy99] [link to this post]
 
Won't dispute the benefit of disconnecting ring wire

I have old fashioned GPO cover plate with hard wired extensions. Disconnecting wire upped speed from 3.5mb to 5.5Mb.
  Print Thread

Jump to