User comments on ISPs
  >> PlusNet plc


Register (or login) on our website and you will not see this ad.


These posts have been archived and can no longer be replied to or modified.
Pages in this thread: 1 | [2] | 3 | (show all)   Print Thread
Standard User deleted
(deleted) Sun 18-Jul-10 13:03:28
Print Post

Re: 21CN migration query


[re: deleted] [link to this post]
 
I'm still happily on 20CN smile

Before changing routers 8 days ago I had 78 day uptime and, at 3km from exchange, get a 6000kbps profile.
Standard User bill888
(committed) Sun 18-Jul-10 14:05:28
Print Post

Re: 21CN migration - Target Noise Margin query


[re: deleted] [link to this post]
 
In reply to a post by nadger:
I'm still happily on 20CN smile

Before changing routers 8 days ago I had 78 day uptime and, at 3km from exchange, get a 6000kbps profile.


Sadly the switch to 21CN has not been good for me.

While I was connected to Alcatel DSLAM, my 2700HGV router had no trouble holding sync for up to a month at a time, with line sync around 5200-5700kbps. My IP profile has been consistent 4500kbps with 9db noise margin. My line has never been particularly stable. (48dB downstream attenuation)

Since moving onto TI MSAN around a week or so ago, the router has been losing sync at least once every 2 days. I noted the line sync had also gone up to around 6000kbps. ie. seems to be less stable.

The more frequent loss of sync would have been fine if it wasn't for the fact something happened this morning where over a dozen disconnects were observed around midnight. As a result, my target noise margin now appears to have been raised to 15dB and my best line sync has plummeted to 3700 to 4544kbps. My IP profile is surely going to nose dive.

I haven't raised a ticket with PlusNet yet.

Does anyone know whether the target noise margin will automatically fall from this 15dB figure, or am I now stuck with it? (I've had the 9db target noise margin figure ever since I joined Plusnet in 2008)

----------------------------------------------------------
Poopex (05-06)->NewNet (07-08)->PlusNet (08-)
Poopex (03-08)->o2 LLU (08-)

Edited by bill888 (Sun 18-Jul-10 14:24:58)

Standard User deleted
(deleted) Mon 19-Jul-10 10:35:19
Print Post

Re: 21CN migration - Target Noise Margin query


[re: bill888] [link to this post]
 
@meldrew
Networks changes are done by the Networks Team, the only reasons they choose on are availability and capacity. There's no point in us changing over all of our customers to 21CN and then leaving bandwidth spare on 20CN.

@bill888
Sounds like we need to raise an intermittent connection fault for you, please visit http://faults.plus.net to do this. We can reset your target SNR margin once the fault is fixed.


Register (or login) on our website and you will not see this ad.

Standard User bill888
(committed) Mon 19-Jul-10 12:22:30
Print Post

Re: 21CN migration - Target Noise Margin query


[re: deleted] [link to this post]
 
In reply to a post by bentrimble:
@bill888
Sounds like we need to raise an intermittent connection fault for you, please visit http://faults.plus.net to do this. We can reset your target SNR margin once the fault is fixed.


I've been monitoring my connection last couple of days.

I have noticed I get far fewer errors reported by my router since the Target Noise margin is set to 15db resulting in lower 4500kbps sync speed.

I noticed late last night at 11pm, the current noise margin dipped from the target value of 15db to 11db.

Based on my observations, when I was connected to Alcatel DSLAM, a target margin of 9db seemed to be the optimal setting to give me reliable 5200-5700kbps connection (6db target previously led to frequent disconnects)

But I now perceive 9db to be too low since moving to TI MSAN on 21CN, as this gives me line speeds as high at 6000kbps which I perceive as unstable.


I don't believe there is an intermittent fault on my line. My line is not perfect.

Q. How easy would it be to just set my target Noise Margin to 12db, this should give me line sync speed over 5000 kbps thus hopefully restoring the status quo ?

The current 15db setting is too aggressive/safe resulting in sub 4500kbps line speeds for me at the moment.

----------------------------------------------------------
Poopex (05-06)->NewNet (07-08)->PlusNet (08-)
Poopex (03-08)->o2 LLU (08-)
Standard User deleted
(deleted) Mon 19-Jul-10 16:06:27
Print Post

Re: 21CN migration - Target Noise Margin query


[re: bill888] [link to this post]
 
The line will naturally train in at the correct value. If we set it to 12dB (which can only be done via raising a fault and calling our suppliers) then it will only change when DLM wants it to.
Standard User RobertoS
(legend) Mon 19-Jul-10 17:43:22
Print Post

Re: 21CN migration (edited)


[re: bill888] [link to this post]
 
Edit - Just realised, I'm assuming you have been moved onto ADSLs+ as part of the switch. If you are on the 21CN system but with an ADSL Max profile then I'm probably talking rot below.

A better solution on lines of this length if you can achieve it with your router, or if Plusnet will set it for you, is to use ADSL2 rather than ADSL2+.

ADSL2 is inherently more stable than ADSL2+ because it doesn't use the higher frequencies which can give trouble. You also get about 3dB lower attenuation for the same reason. The same frequencies and attenuation that you had on ADSL Max, just better utilised.

Many of us on O2 LLU find we gain both stability and a small amount of speed by doing this.

My broadband basic info/help site - www.robertos.me.uk
My domains,website and mail hosting - Tsohost. Internet connection - O2 Standard.

Edited by RobertoS (Mon 19-Jul-10 17:56:25)

Standard User bill888
(committed) Mon 19-Jul-10 18:16:12
Print Post

Re: 21CN migration (edited)


[re: RobertoS] [link to this post]
 
I'm still on ADSL1 (ADSL Max).

I'll give it a week to prove the line is stable. Then I'll try a manual resync. If there is no change to the presently high target noise margin of 15db, then I'll raise a fault ticket to see if we can get it lowered to 12db.



According to BT speedtester, I think my IP profile is now 3291k (was 4500k)
(Downstream line attenuation unchanged from 20CN, at around 48.4db according to my router.)

----------------------------------------------------------
Poopex (05-06)->NewNet (07-08)->PlusNet (08-)
Poopex (03-08)->o2 LLU (08-)
Standard User deleted
(deleted) Mon 19-Jul-10 18:40:20
Print Post

Re: 21CN migration (edited)


[re: bill888] [link to this post]
 
Mine jumped 3dB when moving from 20CN to 21CN and hasn't dropped since.
I did a fair bit of experimenting after the 10 day so-called training period had passed and found that I could drive the speed up to 4256kbps noise margin 6.9dB but then dropped it back to 4,000kbps (3,500 IP profile) but under certain weather conditions the error rate went very high so I lowered to about 3,600kbps (3,000 IP profile) by pushing the noise margin down by about 1dB to 11dB and it has been absolutely stable
Standard User bill888
(committed) Fri 23-Jul-10 15:49:17
Print Post

Re: 21CN migration - fault ticket raised


[re: deleted] [link to this post]
 
Line stable since last weekend. No change in target noise margin when I rebooted router. Still stuck at 15db. Raised a fault ticket this morning.

----------------------------------------------------------
Poopex (05-06)->NewNet (07-08)->PlusNet (08-)

Edited by bill888 (Fri 23-Jul-10 15:51:47)

Standard User deleted
(deleted) Fri 23-Jul-10 15:56:08
Print Post

Re: 21CN migration - fault ticket raised


[re: bill888] [link to this post]
 
PM me your username and I'll take a look for you
Pages in this thread: 1 | [2] | 3 | (show all)   Print Thread

Jump to