User comments on ISPs
  >> PlusNet plc


Register (or login) on our website and you will not see this ad.


These posts have been archived and can no longer be replied to or modified.
  Print Thread
Standard User deleted
(deleted) Wed 21-Jul-10 23:00:32
Print Post

Copper Line Check Test Results ~ a question?


[link to this post]
 
Hi All

As part of ongoing issues with my connection (speed & margin related) PlusNet did a test I have never seen done before ~ a Copper Line Test.

The results:-
Description - FAULT - Loop (Rectifed)

Diagnosis Code - V035

MFL - CA

Now PlusNet have told me to get mt phone provider (BT) to test the line and report back to them the findings so on the surmise that I tell BT that my ISP has done the above test ~ for the record the voice aspect of the phone seems fine ~ just what do the results as reported by PlusNet mean???

I have Googled and one answer suggests it means damp or water affecting the connection somewhere alon its length???

So anyone familiar with Openreach codes and what they might or might not do next???


TIA

smile
Standard User deleted
(deleted) Thu 22-Jul-10 09:13:28
Print Post

Re: Copper Line Check Test Results ~ a question?


[re: deleted] [link to this post]
 
It means a failure in the telephone connectivity. It could be damp / water as you suggest but also faulty wiring or connections. Your telephone provider should be able to perform the same test that we did (they'll ask you to unplug everything and call you back) and identify the failure then resolve it.

Most of the time this will resolve your broadband problems but if not, we can then investigate further for you.

Whilst we have this sort of fault identified, we can't even run broadband fault diagnostics never mind raise a fault to our suppliers.
Standard User Jaggies
(member) Fri 23-Jul-10 00:49:24
Print Post

Re: Copper Line Check Test Results ~ a question?


[re: deleted] [link to this post]
 
In reply to a post by Routefinder:
As part of ongoing issues with my connection (speed & margin related) PlusNet did a test I have never seen done before ~ a Copper Line Test.

The results:-
Description - FAULT - Loop (Rectifed)

Diagnosis Code - V035

MFL - CA

MFL=Main Fault Location - CA=Customer Apparatus. It looks like you have some faulty equipment connected to the line... The Loop (Rectified) bit also indicates faulty equipment.

~~~~~
Brian
From September 2001 on BTopenworld Home 500/Home 1000/Home 2000. Then ADSLMax on <n>ildram. Moved to ADSL2+ from ADSL24 originally powered by entanet - now powered by MurphX. The loss of over 2Mb of synch is why I'm now with plusnet.
I'm not saying who I work for. Any opinions expressed here are my own.


Register (or login) on our website and you will not see this ad.

Standard User deleted
(deleted) Fri 23-Jul-10 14:40:35
Print Post

Re: Copper Line Check Test Results ~ a question?


[re: deleted] [link to this post]
 
It means the resistance between a and b wires is low and there is a different resistance testing from a to b than b to a.

Usually a fault on customer wiring or equipment as low insulation outside will usually pick up battery from other lines.

Sometimes a router can give this as a duff test. Disappointing that Plusnet are palming you off to your voice supplier.

Edited by deleted (Fri 23-Jul-10 14:44:22)

Standard User deleted
(deleted) Fri 23-Jul-10 15:22:09
Print Post

Re: Copper Line Check Test Results ~ a question?


[re: deleted] [link to this post]
 
In reply to a post by RandomJointer:
Disappointing that Plusnet are palming you off to your voice supplier.


We can't even test a broadband fault when a PSTN fault is identified, nevermind raise a broadband fault to our suppliers.
  Print Thread

Jump to