Ran the setup wizard on the Thomson router and it effectively reset it to factory defaults. No change to the status of the connection.
Plugged in my Netgear DSL2640b router. Clicked on the status page and its exactly the same as cajef:
Connection Type : G.DMT
ADSL Status (Downstream/Upstream) : 8128(Kbps) / 448(Kbps)
The CLI gives quite a bit of info:
> adsl info --stats
adsl: ADSL driver and PHY status
Status: ShowtimeRetrain Reason: 0
Channel: FAST, Upstream rate = 448 Kbps, Downstream rate = 8128 Kbps
Link Power State: L0
Mode: G.DMT
Channel: Fast
Trellis: ON
Line Status: No Defect
Training Status: Showtime
Down Up
SNR (dB): 12.8 30.0
Attn(dB): 29.0 14.0
Pwr(dBm): 19.8 11.3
Max(Kbps): 10112 1288
Rate (Kbps): 8128 448
G.dmt framing
K: 255(0) 15
R: 0 0
S: 1 1
D: 1 1
ADSL2 framing
MSGc: 1 1
B: 255 15
M: 1 1
T: 1 1
R: 0 0
S: 1.0000 1.0000
L: 2048 128
D: 1 1
Counters
SF: 47730 47670
SFErr: 0 0
RS: 0 0
RSCorr: 0 0
RSUnCorr: 0 0
HEC: 0 0
OCD: 0 0
LCD: 0 0
Both routers are behaving exactly the same and no sign of any change in speed so I'll pm Matthew Taylor and see if he has any ideas.