Pages in this thread: 
Print Thread
It's possibly due to error build up.
You never know the full story. I doubt you'll experience any major issues.
Yes I forgot about the errors, posted on PN forum here, re my errors but opinion was should be OK I'll post current below. I hope if and when the O2 transfer goes over all is OK. I have phone with BT so at least that won't move. Note it is ADSL1 on O2 LLU ADSL2+ equipment (long story). Line @ 4.1Km
Uptime: 3 days, 3:04:08
DSL Type: G.992.1 annex A
Channel mode: Interleave
Maximum Bandwidth (Up/Down) [kbps/kbps]: 1,159 / 6,264
Bandwidth (Up/Down) [kbps/kbps]: 969 / 5,711
Data Transferred (Sent/Received) [kB/kB]: 0.00 / 0.00
Output Power (Up/Down) [dBm]: 12.0 / 19.0
Line Attenuation (Up/Down) [dB]: 31.5 / 55.0
SN Margin (Up/Down) [dB]: 6.0 / 5.0
Vendor ID (Local/Remote): TMMB / BDCM
Loss of Framing (Local/Remote): 0 / 0
Loss of Signal (Local/Remote): 0 / 0
Loss of Power (Local/Remote): 0 / 0
Loss of Link (Remote): 0
Error Seconds (Local/Remote): 8 / 0
FEC Errors (Up/Down): 1,421 / 48,420,028
CRC Errors (Up/Down): 1,421 / 1,353
HEC Errors (Up/Down): 493 / 1,065
test socket in week for 1hr
Uptime: 0 days, 1:00:02
DSL Type: G.992.1 annex A
Channel mode: Interleave
Maximum Bandwidth (Up/Down) [kbps/kbps]: 1,163 / 6,300
Bandwidth (Up/Down) [kbps/kbps]: 969 / 5,782
Loss of Link (Remote): 0
Error Seconds (Local/Remote): 0 / 0
FEC Errors (Up/Down): 18 / 9,846
CRC Errors (Up/Down): 21 / 8
HEC Errors (Up/Down): 7 / 8