User comments on ISPs
  >> TalkTalk Broadband


Register (or login) on our website and you will not see this ad.


These posts have been archived and can no longer be replied to or modified.
Pages in this thread: 1 | 2 | (show all)   Print Thread
Standard User deleted
(deleted) Fri 04-Jun-10 21:07:50
Print Post

What do all these messages mean


[link to this post]
 
For months I have been getting random disconnects (echo failed or just MPOA link down .. also getting breaks on make or receive telephone calls ..

Talktalk have sent me a new Huawai router .. still drops on phone calls .. not seen an echo failure yet but have had an MPOA link down in the middle of a transaction with a supplier !"£"^£*£%£$£$%£^£& grrr..

the new modem continually shows messages in the log as follows ..

6/3/2010 20:55:55> Firewall: Filter no port UDP packet!
6/3/2010 20:56:2> Firewall: Filter no listen TCP packet!
6/3/2010 20:56:5> Firewall: Filter no listen TCP packet!
6/3/2010 20:56:11> Last errorlog repeat 1 Times
6/3/2010 20:56:11> Firewall: Filter no port UDP packet!
6/3/2010 20:56:19> Firewall: Filter no listen TCP packet!
6/3/2010 20:56:32> Firewall: Filter no listen TCP packet!
6/3/2010 20:57:6> Firewall: Filter no port UDP packet!
6/3/2010 20:57:7> Last errorlog repeat 1 Times
6/3/2010 20:57:55> Firewall: Filter no port UDP packet!
6/3/2010 20:58:10> Firewall: Filter no port UDP packet!
6/3/2010 20:59:36> Firewall: Filter no port UDP packet!

tried to find out if this is the norm or what it all means but nobody ever answers that query on Talktalk

My connection is the slowest its ever been, as low as 2.0meg sync ..
Standard User deleted
(deleted) Fri 04-Jun-10 22:18:51
Print Post

Re: What do all these messages mean


[re: deleted] [link to this post]
 
don't worry about it its just your firewall blocking communications that breaks the firewall rules

Firewall: Filter no port UDP packet! - that would mean there was not a valid port assigned to the communication (computer use ports to talk to each other)

the best support would come from the manufacture of the router
Standard User Jack_Hackett
(knowledge is power) Sat 05-Jun-10 11:47:01
Print Post

Re: What do all these messages mean


[re: deleted] [link to this post]
 
tried to find out if this is the norm or what it all means but nobody ever answers that query on Talktalk
]


As cobra says nothing to worry about, here is mine -



1/1/2000 0:16:45> Firewall: Filter no port UDP packet!
1/1/2000 0:18:16> Firewall: Filter no listen TCP packet!
1/1/2000 0:20:14> Last errorlog repeat 2 Times
1/1/2000 0:20:14> Firewall: Filter no port UDP packet!
1/1/2000 0:22:33> Last errorlog repeat 1 Times
1/1/2000 0:27:37> Firewall: Filter no listen TCP packet!
1/1/2000 0:32:8> Last errorlog repeat 1 Times
1/1/2000 0:32:8> Firewall: Filter no port UDP packet!
1/1/2000 0:37:32> Firewall: Filter no listen TCP packet!
1/1/2000 1:0:31> Firewall: Filter no listen TCP packet!
1/1/2000 1:21:2> Last errorlog repeat 3 Times
1/1/2000 1:21:2> Firewall: Filter no port UDP packet!
1/1/2000 1:25:31> Last errorlog repeat 2 Times
1/1/2000 1:25:31> Firewall: Filter no listen TCP packet!
1/1/2000 1:26:33> Last errorlog repeat 1 Times
1/1/2000 1:29:39> DHCP server assigns 192.168.1.3
1/1/2000 1:29:50> Firewall: Filter no port UDP packet!
1/1/2000 1:31:44> Last errorlog repeat 100 Times
1/1/2000 1:31:44> Firewall: Filter no listen TCP packet!
1/1/2000 1:32:18> Firewall: Filter no port UDP packet!

To get the speed problem sorted register at the TT forum the OCE's should be able to help, they only work office hours Monday - Friday but there are a few members who are very clued up and may be able to give you some suggestions over the weekend. -

http://www.talktalkmembers.com/forums/index.php


Register (or login) on our website and you will not see this ad.

Standard User Futaura
(committed) Sat 05-Jun-10 12:04:58
Print Post

Re: What do all these messages mean


[re: Jack_Hackett] [link to this post]
 
It's not necessarily nothing to worry about though. The messages could simply mean an external computer is trying to connect to yours without your consent, hence the firewall on the router blocks the connection (a good thing, obviously) before it can get anywhere near any computers connected to the router. Or if these messages happen when you are using a particular application, that application may need those ports to be opened on the firewall, either manually via router's web interface or UPnP (if this is enabled/supported/working).
Standard User Futaura
(committed) Sat 05-Jun-10 12:13:38
Print Post

Re: What do all these messages mean


[re: deleted] [link to this post]
 
In reply to a post by tbandsp:
For months I have been getting random disconnects (echo failed or just MPOA link down .. also getting breaks on make or receive telephone calls ..

Talktalk have sent me a new Huawai router .. still drops on phone calls .. not seen an echo failure yet but have had an MPOA link down in the middle of a transaction with a supplier !"£"^£*£%£$£$%£^£& grrr..

If the router was the same type as your old one, make sure you use the new PSU too. Dodgy PSUs can sometimes cause problems like this. Presumably you've tried difference microfilters too?
Standard User deleted
(deleted) Sat 05-Jun-10 13:35:37
Print Post

Re: What do all these messages mean


[re: deleted] [link to this post]
 
Oh, right ..

makes reading the log a bit difficult though .. I think I lost connection about 3 hours ago, but unless there's some way of viewing the whole log, rather than the last 10 minutes or so, I can't tell why

Thanks for your interest
Standard User deleted
(deleted) Sat 05-Jun-10 15:40:39
Print Post

Re: What do all these messages mean


[re: deleted] [link to this post]
 
depending on the make of the router, you might be able to view more if you download the log or set it up so that it emails you the logs
Standard User velvetTearz
(newbie) Mon 07-Jun-10 18:39:47
Print Post

Re: What do all these messages mean


[re: deleted] [link to this post]
 
can you help what these messages mean:


1/1/2000 0:19:18> netMakeChannDial: err=-3001 rn_p=804f38e0
1/1/2000 0:19:21> Last errorlog repeat 21 Times
1/1/2000 0:19:21> ADSL Line:Down
1/1/2000 0:19:21> netMakeChannDial: err=-3001 rn_p=804f38e0
1/1/2000 0:19:21> Last errorlog repeat 3 Times
1/1/2000 0:19:21> ADSL Line:Trainning
1/1/2000 0:19:21> netMakeChannDial: err=-3001 rn_p=804f38e0
1/1/2000 0:19:25> Last errorlog repeat 9 Times
1/1/2000 0:19:25> ADSL Line:Down
1/1/2000 0:19:25> netMakeChannDial: err=-3001 rn_p=804f38e0
1/1/2000 0:19:29> Last errorlog repeat 6 Times
1/1/2000 0:19:29> ADSL Line:Trainning
1/1/2000 0:19:29> netMakeChannDial: err=-3001 rn_p=804f38e0
1/1/2000 0:19:35> Last errorlog repeat 15 Times
1/1/2000 0:19:35> ADSL Line:Trainning
1/1/2000 0:19:36> netMakeChannDial: err=-3001 rn_p=804f38e0
1/1/2000 0:19:48> Last errorlog repeat 23 Times
1/1/2000 0:19:48> ADSL Line:Show time
1/1/2000 0:19:48> MPOA Link Up
1/1/2000 0:19:52> ppp:CHAP Opening
1/1/2000 0:19:52> ppp_ready: ch:8050af1c, iface:8048bd90
1/1/2000 0:19:52> ppp:ch<0> Up
1/1/2000 0:19:52> Accept() fail
1/1/2000 0:19:52> Accept() fail

I forgot to add that the internet will every half hour go down (not just the pc or laptop the whole thing). I have changed the micofilter but the problem persists, please help!



Velvettearz

Edited by velvetTearz (Mon 07-Jun-10 18:43:24)

Standard User Deadbeat
(knowledge is power) Mon 07-Jun-10 19:12:16
Print Post

Re: What do all these messages mean


[re: velvetTearz] [link to this post]
 
You have an internal wiring/equipment fault, a line fault or an exchange fault.
Plug the router directly into the hidden test socket of the NTE5 (If available) using only the short lead that came with it and a known good filter. Do not use telephone extension cable!!!
What happens now?
Standard User Deadbeat
(knowledge is power) Mon 07-Jun-10 19:14:44
Print Post

Re: What do all these messages mean


[re: deleted] [link to this post]
 
In reply to a post by tbandsp:
For months I have been getting random disconnects (echo failed or just MPOA link down .. also getting breaks on make or receive telephone calls ..


Which points to a line/exchange/internal cabling etc fault. You need to get that sorted first.
Pages in this thread: 1 | 2 | (show all)   Print Thread

Jump to