Technical Discussion
  >> Technical Issues


Register (or login) on our website and you will not see this ad.


These posts have been archived and can no longer be replied to or modified.
Pages in this thread: 1 | [2] | (show all)   Print Thread
Standard User ian72
(fountain of knowledge) Thu 23-Apr-09 11:19:53
Print Post

Re: DNS settings - Just interested


[re: deleted] [link to this post]
 
In addition to all the above you could actually use an alternative to manual config on each PC.

If you want a PC to always have the same IP then the router probably has an option to set an IP address statically for the PC. That way the PC can continue obtaining automatically but you can assign a particular address to a particular device. Netgear and thomson routers do this and any good router should.

It also means that if the DNS servers change you only have to update them on the router (and if it is set to pick them up automatically from the ISP you wouldn't even need to change there).

I use this method on my network and most PCs are statically assigned via the router without messing about with the config on each machine.
Standard User kwikbreaks
(eat-sleep-adslguide) Thu 23-Apr-09 12:14:59
Print Post

Re: DNS settings - Just interested


[re: ian72] [link to this post]
 
You can manually assign an IP and still use the router DNS settings by specifying the router IP as DNS as was already mentioned. That's what I do.



If you can't fix it with a hammer you've got an electrical problem.
Standard User ian72
(fountain of knowledge) Thu 23-Apr-09 12:57:49
Print Post

Re: DNS settings - Just interested


[re: kwikbreaks] [link to this post]
 
Yes, but personally I prefer doing it at the router and not changing settings on the PCs. I was offering an alternative not saying that other ways weren't valid.


Register (or login) on our website and you will not see this ad.

Standard User kwikbreaks
(eat-sleep-adslguide) Thu 23-Apr-09 14:21:03
Print Post

Re: DNS settings - Just interested


[re: ian72] [link to this post]
 
The part of your post I was taking issue with was...

"It also means that if the DNS servers change you only have to update them on the router"

...as it implies that you have to change every PC on the network if the IP is coded manually and that isn't so.

As you say both ways are perfectly valid. The only reason I do on the PC is because at least one router I've had either didn't offer the "always use this IP" functionality or buried it deeper than I looked.



If you can't fix it with a hammer you've got an electrical problem.
Standard User ian72
(fountain of knowledge) Thu 23-Apr-09 14:30:53
Print Post

Re: DNS settings - Just interested


[re: kwikbreaks] [link to this post]
 
Ah, OK, missed that specific point - agreed.
Pages in this thread: 1 | [2] | (show all)   Print Thread

Jump to